Wear and Corrosion Properties for the Effect of Addition Cu to Ti-18Nb Biomaterial

dc.authoridAnaee, Rana/0000-0003-1021-0127
dc.contributor.authorDemirtas, Hueseyin
dc.contributor.authorRiyadh, Mohammed
dc.contributor.authorAnaee, Rana
dc.date.accessioned2024-09-29T15:54:53Z
dc.date.available2024-09-29T15:54:53Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe current work related to investigate wear and corrosion properties for addition three weight% of copper to Ti-18Nb alloy using powder metallurgy technique including (5, 7 and 9 wt%). The percent of 7% gave the lowest wear rate for base alloy (Ti-18Nb) because of formation a hard Ti2Cu phase, with different properties for the corrosion behavior because of the variation in produced cathodic and anodic areas in tested medium (simulated body fluid) and then increasing the micro-galvanic cells over the alloy's surface, adding 9% Cu gave polarization resistance equal to (448.46 k ohm cm(2)) that was higher than resistance of base alloy and alloy with 5 and 7% Cu. Atomic force microscopy was used to analysis the surface topography with measuring the roughness of surface; also 7% of Cu gave the highest surface roughness (20.06 nm) compared with other percents due to the formed hard phase.en_US
dc.identifier.doi10.1007/s42250-023-00690-8
dc.identifier.endpage3193en_US
dc.identifier.issn2522-5758
dc.identifier.issn2522-5766
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-85159681639en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage3185en_US
dc.identifier.urihttps://doi.org/10.1007/s42250-023-00690-8
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4319
dc.identifier.volume6en_US
dc.identifier.wosWOS:000989917200001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringernatureen_US
dc.relation.ispartofChemistry Africa-A Journal of the Tunisian Chemical Societyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTi alloyen_US
dc.subjectBio implanten_US
dc.subjectCorrosionen_US
dc.subjectPowder metallurgyen_US
dc.subjectWear resistanceen_US
dc.titleWear and Corrosion Properties for the Effect of Addition Cu to Ti-18Nb Biomaterialen_US
dc.typeArticleen_US

Dosyalar