Development of Forming Temperature Curves for Warm Deep Drawing Process Under Non-isothermal Conditions

Basit Öğe Kaydı
dc.authoridARCAKLIOGLU, Erol/0000-0001-8073-5207
dc.contributor.authorCetin, M. Huseyin
dc.contributor.authorUgur, Abdullah
dc.contributor.authorYigit, Osman
dc.contributor.authorGokkaya, Hasan
dc.contributor.authorArcaklioglu, Erol
dc.date.accessioned2024-09-29T15:54:43Z
dc.date.available2024-09-29T15:54:43Z
dc.date.issued2015
dc.departmentKarabük Üniversitesien_US
dc.description.abstractTemperature is the main effective process parameter in the warm deep drawing (WDD) process to improve the formability of light-weight engineering materials, and this feature requires the accurate measurement and assessment of temperature for process stability. In this study, an evaluation of the WDD process was conducted according to the forming temperature curves (FTCs) characterized from work piece temperatures instead of tool temperatures, as usual. To achieve this goal, a special index material was developed to accurately obtain FTCs from the work piece material under closed and heated tool conditions. The differences of temperature on work piece material are required to define temperatures by curves. The characteristic behavior of these curves was investigated under non-isothermal WDD of AA 5754-O. In the experimentation stage, the process parameters, namely FTC, blank holder force and punch velocity, which assure successful deep drawability, were determined according to the failure-free cups by analyzing wrinkling and tearing conditions and minimum cup height parameters as output parameters. As the next step, optimum conditions were investigated by evaluating the cup volume and spring-back parameters. As a general conclusion, approximately 330A degrees C in the flange-die radius region and 100A degrees C in the cup wall-punch bottom region are the ideal optimum temperatures for the warm deep drawing process.en_US
dc.description.sponsorshipKarabuk University Scientific Research Projects Management Coordination Unit [KBU-BAP-13/1-DR-001]en_US
dc.description.sponsorshipThis research was supported by the Karabuk University Scientific Research Projects Management Coordination Unit under Grant No. KBU-BAP-13/1-DR-001. The authors are also deeply grateful for this support.en_US
dc.identifier.doi10.1007/s13369-015-1756-0
dc.identifier.endpage2784en_US
dc.identifier.issn1319-8025
dc.identifier.issn2191-4281
dc.identifier.issue9en_US
dc.identifier.scopus2-s2.0-84938890562en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage2763en_US
dc.identifier.urihttps://doi.org/10.1007/s13369-015-1756-0
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4235
dc.identifier.volume40en_US
dc.identifier.wosWOS:000359433500025en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofArabian Journal For Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWarm deep drawingen_US
dc.subjectForming temperatureen_US
dc.subjectFailure-free cupsen_US
dc.subjectOptimum forming levelen_US
dc.subjectAA5754-Oen_US
dc.titleDevelopment of Forming Temperature Curves for Warm Deep Drawing Process Under Non-isothermal Conditionsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu