The tribological properties of A356-SiCp metal-matrix composites fabricated by thixomoulding technique

Basit Öğe Kaydı
dc.authoridYILDIRIM, MUSA/0000-0002-2464-1182
dc.contributor.authorOzyurek, Dursun
dc.contributor.authorYildirim, Musa
dc.contributor.authorCiftci, Ibrahim
dc.date.accessioned2024-09-29T16:06:17Z
dc.date.available2024-09-29T16:06:17Z
dc.date.issued2012
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, A356-SiCp metal-matrix composites were produced through thixomoulding process, and these composites were subjected to wear tests. The composites containing various volume fractions of SiCp particles (5%, 10%, 15% and 20%) as the reinforcement were produced at two different temperatures of 590 degrees C and 600 degrees C. The influences of processing temperatures and reinforcement ratio on the properties and wear behaviour of the composites were investigated. Prior to the wear tests, microstructural properties and hardness of the composites were determined. For the wear tests, a pin-on-disc-type wear apparatus was employed to carry out the wear tests. The wear tests were carried out at 2.0 m/s sliding speed under 15 N load and for four different sliding distances. A scanning electron microscope (SEM) was used to examine the wear mechanisms on the worn surfaces of the composites. The results indicated that sphericity rate and hardness of the composites produced at 590 degrees C were higher than those of the composites produced at 600 degrees C. In addition, the composites produced at 590 degrees C exhibited lower weight loss and friction coefficient.en_US
dc.identifier.doi10.1515/secm-2012-0012
dc.identifier.endpage356en_US
dc.identifier.issn0334-181X
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-84888411466en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage351en_US
dc.identifier.urihttps://doi.org/10.1515/secm-2012-0012
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6729
dc.identifier.volume19en_US
dc.identifier.wosWOS:000311932600004en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWalter De Gruyter & Coen_US
dc.relation.ispartofScience and Engineering of Composite Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAl/SiC compositeen_US
dc.subjectthixomouldingen_US
dc.subjecttribological propertiesen_US
dc.titleThe tribological properties of A356-SiCp metal-matrix composites fabricated by thixomoulding techniqueen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu