Abrasive wear behaviour of Al-SiC composites produced by pressure infiltration technique

Basit Öğe Kaydı
dc.authoridCandan, Ercan/0000-0002-0610-5044
dc.authoridCimenoglu, Huseyin/0000-0002-9921-7108
dc.authoridAHLATCI, Hayrettin/0000-0002-6766-4974
dc.contributor.authorCandan, E
dc.contributor.authorAhlatci, H
dc.contributor.authorÇïmenoglu, H
dc.date.accessioned2024-09-29T16:00:57Z
dc.date.available2024-09-29T16:00:57Z
dc.date.issued2001
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, abrasive wear behaviours of compacts produced by pressure infiltration technique were investigated. Pure aluminium and SiC particles having 13 and 37 mum mean diameters were used in the infiltration process. The volume fraction of the SiC particles was 60% in the compacts. Abrasive wear tests were carried out under the normal load of 28 N, by rubbing the compacts to abrasive Al2O3 grains with diameters in the range of 85-250 mum. Wear tests revealed that, the effect of the size of SIC particles on the wear resistance of compacts, depends on the size of the Al2O3 abrasive grains being rubbed. The compact which had 13 mum SiC particles exhibited higher wear rate than the compact having 37 mum SiC particles when rubbed on fine abrasive Al2O3 grains (<150 m) Wear tests performed on Al2O3 abrasive grains having diameters higher than 150 mum revealed that, the compact reinforced with 37 mum SiC particles had higher wear rate than the compact reinforced with 13 mum SiC particles. (C) 2001 Elsevier Science B.V. All rights reserved.en_US
dc.identifier.doi10.1016/S0043-1648(00)00499-3
dc.identifier.endpage138en_US
dc.identifier.issn0043-1648
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-0035241953en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage133en_US
dc.identifier.urihttps://doi.org/10.1016/S0043-1648(00)00499-3
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5438
dc.identifier.volume247en_US
dc.identifier.wosWOS:000166383900002en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofWearen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectwearen_US
dc.subjectaluminiumen_US
dc.subjectpressure infiltration techniqueen_US
dc.subjectabrasionen_US
dc.subjectcompositeen_US
dc.titleAbrasive wear behaviour of Al-SiC composites produced by pressure infiltration techniqueen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu