Effect of a 3.5% NaCl-10% HCl Corrosive Environment on the Fatigue Behavior of Hot Rolled Aluminum 5083-H111

Basit Öğe Kaydı
dc.authoridAHLATCI, Hayrettin/0000-0002-6766-4974
dc.authoridEsen, Ismail/0000-0002-7853-1464
dc.contributor.authorElhasslouk, Masoud M. M.
dc.contributor.authorEsen, Ismail
dc.contributor.authorAhlatci, Hayrettin
dc.contributor.authorAkin, Bengu
dc.date.accessioned2024-09-29T16:08:08Z
dc.date.available2024-09-29T16:08:08Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study deals with the microstructure of rolled Al5083-H111 materials, their hardness, corrosion in different solutions, and rotary bending fatigue properties of non-corroded and corroded samples in different solutions. This study is the first to report the fatigue behavior of corroded samples in different aggressive corrosion environments of Al5083. The microstructure of the Al5083-H111 material is in the form of grains oriented towards the rolling direction and it consists of binary Al-Mg, Al-Mn, and Mg-Si; ternary Al-Mg-Si; and quaternary Al-Mn-Fe-Si and Al-Cr-Mn precipitated randomly at the grain boundary. The Brinell hardness of the Al5083-H111 material is 68.67 HB. According to the results of the immersion corrosion, while the sample was more resistant to corrosion in a 3.5% NaCl environment, it showed a less resistant behavior in a 3.5% NaCl + 10% HCl environment. As a result of the fatigue test, it was observed that the sample that did not undergo corrosion showed a higher fatigue life than the samples that were exposed to corrosion. The fatigue rate of the 3.5% NaCl corrosion sample was 3.5 times lower than the fatigue rate of the 3.5% NaCl + 10% HCl corrosion sample.en_US
dc.identifier.doi10.3390/ma16144996
dc.identifier.issn1996-1944
dc.identifier.issue14en_US
dc.identifier.pmid37512270en_US
dc.identifier.scopus2-s2.0-85166236786en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.3390/ma16144996
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7386
dc.identifier.volume16en_US
dc.identifier.wosWOS:001037651400001en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.language.isoenen_US
dc.publisherMdpien_US
dc.relation.ispartofMaterialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectH11en_US
dc.subjectAl 5083en_US
dc.subjectcorrosionen_US
dc.subjectfatigue lifeen_US
dc.titleEffect of a 3.5% NaCl-10% HCl Corrosive Environment on the Fatigue Behavior of Hot Rolled Aluminum 5083-H111en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu