Upper Cooling Water Technique for Enhancing the Performance of PV Module

Basit Öğe Kaydı
dc.contributor.authorAl-Mamoori, A.
dc.contributor.authorBakirci, M.
dc.contributor.authorAl-Zuhayri, A.
dc.date.accessioned2024-09-29T16:21:04Z
dc.date.available2024-09-29T16:21:04Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description4th International Scientific Conference of Engineering Sciences and Advances Technologies, IICESAT 2022 -- 3 June 2022 through 4 June 2022 -- Baghdad -- 190905en_US
dc.description.abstractThe abundance and sustainability of solar radiation has enabled consumers to take advantage of photovoltaic technology while leaving polluting energy sources. the high temperature stored in the surfaces still to be a barrier to the monocrystalline photovoltaic module's advancement in terms of performance, In addition to its destruction and short life in the long run. The idea of this article is to undertake an experimental investigation into improving the thermal and electrical properties of photovoltaic panels erected in the harsh environment of Iraq. The system was implemented based on hybrid passive cooling technology with the help of spray nozzles overflowing with water on front of the panel. The upper photovoltaic panel surface cooling approach is one of the most promising technologies in heat dissipation, leading to improved electrical properties. The experiment was carried out in a hot, low-wind, highly radioactive climate with a choice of low and high flows, i.e., 1 and 3 L/m, respectively. Analysis of the results of the maximum flow indicated that the panel temperature was reduced by about half-compared to the uncooled panel and in the same context; the infrared images supported these results. After dissipation, the output power was observed to increase by 19.77% and 57.23%, respectively, as did the efficiency, which increased by 18.76% and 47.52% for the 1 and 3 L/m flows, respectively. Finally, the 3 L/m flow was effective in removing a significant amount of heat while also improving the electrical characteristics. On the other hand, the study found that using drainage water to irrigate crops to get through the dry season was economically feasible. © 2023 American Institute of Physics Inc.. All rights reserved.en_US
dc.identifier.doi10.1063/5.0157734
dc.identifier.issn0094-243X
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85176735676en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.urihttps://doi.org/10.1063/5.0157734
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9527
dc.identifier.volume2830en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherAmerican Institute of Physics Inc.en_US
dc.relation.ispartofAIP Conference Proceedingsen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCooling techniqueen_US
dc.subjectFront coolingen_US
dc.subjectimprove efficiencyen_US
dc.subjectPhotovoltaic moduleen_US
dc.subjectSprayingen_US
dc.titleUpper Cooling Water Technique for Enhancing the Performance of PV Moduleen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu