Effect of the blank holder force on drawing of aluminum alloy square cup: Theoretical and experimental investigation
Küçük Resim Yok
Tarih
2008
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, the influence of AA5754-O material, an aluminum alloy, in forming the blank holder force (BHF) in deep drawing process has been investigated. For this purpose, a new experimental system has been prepared. By means of this system, deep drawing process can be implemented through applying variable forces in computer-controlled manner on the blank holder and sheet plate. The numerical model of forming with deep drawing process has been built up and analyzed via the LS-DYNA software. Cup depths, tearing and wall thickness variations of the experimental and numerical results have been compared. It has been observed that no earing and wrinkling have occurred in BHF's between 1.3 and 8 MPa in square deep drawing process, and that tears have occurred in forces exceeding 18 MPa. It has further been observed that the best forming has occurred at 5 MPa, and that the numerical and experimental model developed is in harmony with one another at a rate of 85%. © 2007 Elsevier B.V. All rights reserved.
Açıklama
Anahtar Kelimeler
AA5754-O, Earings, Finite element analyze, Square deep drawing
Kaynak
Journal of Materials Processing Technology
WoS Q Değeri
Scopus Q Değeri
Q1
Cilt
206
Sayı
1-3
