Mechanical Properties and Corrosion Behavior of As-Cast Mg-Zn-Zr-(La) Magnesium Alloys
dc.authorid | AHLATCI, Hayrettin/0000-0002-6766-4974 | |
dc.authorid | Zengin, Huseyin/0000-0001-7518-1625 | |
dc.contributor.author | Zengin, Huseyin | |
dc.contributor.author | Turen, Yunus | |
dc.contributor.author | Ahlatci, Hayrettin | |
dc.contributor.author | Sun, Yavuz | |
dc.date.accessioned | 2024-09-29T15:51:29Z | |
dc.date.available | 2024-09-29T15:51:29Z | |
dc.date.issued | 2018 | |
dc.department | Karabük Üniversitesi | en_US |
dc.description.abstract | The effects of La content on the mechanical properties and corrosion behavior of as-cast Mg-Zn-Zr (ZK) magnesium alloys were investigated. The results showed that La addition to ZK60 alloy resulted in a considerable grain refinement and an increase in the volume fraction of second phases by formation of Mg-Zn-La ternary phase. The tensile tests were performed at both room and elevated temperatures. At room temperature, the yield and tensile strengths and elongation-to-fracture significantly increased with 0.2 wt.% La addition, then deteriorated slightly with increasing La additions above 0.2 wt.%. At 200 A degrees C, the yield and tensile strengths continually improved and elongation-to-fracture decreased with increasing La content due to the presence of thermally stable Mg-Zn-La phase. Immersion and electrochemical corrosion tests revealed that the formation of Mg-Zn-La phases led to a higher amount of cathodic sites and preferential corrosion propagation, and thus a decrease in the corrosion resistance of ZK60 alloys. | en_US |
dc.description.sponsorship | Scientific Research Projects of Karabuk University (BAP) [KBU-BAP-16/1-DR-075] | en_US |
dc.description.sponsorship | This research is supported by the Scientific Research Projects of Karabuk University (BAP) with Project No. KBU-BAP-16/1-DR-075. | en_US |
dc.identifier.doi | 10.1007/s11665-017-3112-x | |
dc.identifier.endpage | 397 | en_US |
dc.identifier.issn | 1059-9495 | |
dc.identifier.issn | 1544-1024 | |
dc.identifier.issue | 2 | en_US |
dc.identifier.scopus | 2-s2.0-85039555827 | en_US |
dc.identifier.scopusquality | Q2 | en_US |
dc.identifier.startpage | 389 | en_US |
dc.identifier.uri | https://doi.org/10.1007/s11665-017-3112-x | |
dc.identifier.uri | https://hdl.handle.net/20.500.14619/4103 | |
dc.identifier.volume | 27 | en_US |
dc.identifier.wos | WOS:000424305800007 | en_US |
dc.identifier.wosquality | Q3 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | Springer | en_US |
dc.relation.ispartof | Journal of Materials Engineering and Performance | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | corrosion | en_US |
dc.subject | La modification | en_US |
dc.subject | mechanical properties | en_US |
dc.subject | Mg-Zn-Zr magnesium alloys | en_US |
dc.subject | microstructure | en_US |
dc.title | Mechanical Properties and Corrosion Behavior of As-Cast Mg-Zn-Zr-(La) Magnesium Alloys | en_US |
dc.type | Article | en_US |