Investigation on the Effect of The Open and Closed Systems

Basit Öğe Kaydı
dc.contributor.authorEvlen, Hatice
dc.contributor.authorErel, Gulcin
dc.contributor.authorYilmaz, Elif
dc.date.accessioned2024-09-29T16:06:50Z
dc.date.available2024-09-29T16:06:50Z
dc.date.issued2018
dc.departmentKarabük Üniversitesien_US
dc.description.abstract3d printers are modeled on the computer or scanned as 3d is a device that can produce rather quickly as compared to traditional production methods. Factors such as fill rate, layer thickness, extruder temperature, ambient conditions affect the part strength in the Fused Deposition Modeling method which is one of the methods of printing parts in 3D printers. Today, many studies aiming to produce parts under optimum conditions by reducing the effect of these parameters to the minimum are being made. All these reasons are intended to operate in ambient conditions considering performed to determine the effect on the mechanical properties of the product. For this purpose, dimensions of 400x400x360 mm, max. A Cartesian type three-dimensional printer with a tray that can print 160x170x120 mm product can be designed and a prototype has been produced. A total of 54 test samples were printed on the prototype printer using three different polymer materials (ABS, PLA and Power ABS), three different fill rates (10%, 30% and 50%) and two different operating environments (open and enclosed system). The obtained samples were subjected to tensile test and shore hardness test. As a result of the study, it was determined that the samples written in the closed system have lower hardness value and higher tensile strength and% elongation than the samples written in open system.en_US
dc.identifier.doi10.2339/politeknik.386962
dc.identifier.endpage662en_US
dc.identifier.issn1302-0900
dc.identifier.issn2147-9429
dc.identifier.issue3en_US
dc.identifier.startpage651en_US
dc.identifier.urihttps://doi.org/10.2339/politeknik.386962
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7083
dc.identifier.volume21en_US
dc.identifier.wosWOS:000444156000018en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isotren_US
dc.publisherGazi Univen_US
dc.relation.ispartofJournal of Polytechnic-Politeknik Dergisien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subject3-D printersen_US
dc.subjectcomposite filamenten_US
dc.subjectthe occupancy rateen_US
dc.titleInvestigation on the Effect of The Open and Closed Systemsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu