An investigation into the influences of grinding wheel structure on surface roughness and grinding forces
| dc.contributor.author | Demir, H. | |
| dc.contributor.author | Güllü, A. | |
| dc.date.accessioned | 2024-09-29T16:22:21Z | |
| dc.date.available | 2024-09-29T16:22:21Z | |
| dc.date.issued | 2008 | |
| dc.department | Karabük Üniversitesi | en_US |
| dc.description.abstract | This study was carried out in order to examine the influences of grinding wheel structure on surface roughness and grinding forces during surface grinding. Grinding tests were carried out using Al2O3 grinding wheels at different table speeds and at different depth of cuts. The structures of the grinding wheels were 3, 5 and 7. AISI 1050 steel (50 HRc) was used as the workpiece material. For measurement of the grinding forces developed during grinding, a previously designed and constructed dynamometer was used. This dynamometer was also connected to a personal computer to save the grinding force data. The ground surface roughness values were also measured. Increasing grinding wheel structure resulted in significant increases in surface roughness values. However, its influence on grinding forces was marginal. The highest cutting force was obtained when grinding using grinding wheel having the lowest structure at the highest depth of cut. | en_US |
| dc.identifier.endpage | 83 | en_US |
| dc.identifier.issn | 1300-1884 | |
| dc.identifier.issue | 1 | en_US |
| dc.identifier.scopus | 2-s2.0-40249107611 | en_US |
| dc.identifier.scopusquality | Q2 | en_US |
| dc.identifier.startpage | 77 | en_US |
| dc.identifier.uri | https://hdl.handle.net/20.500.14619/10005 | |
| dc.identifier.volume | 23 | en_US |
| dc.indekslendigikaynak | Scopus | en_US |
| dc.language.iso | tr | en_US |
| dc.relation.ispartof | Journal of the Faculty of Engineering and Architecture of Gazi University | en_US |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | AISI 1050 | en_US |
| dc.subject | Al<sub>2</sub>O<sub>3</sub> | en_US |
| dc.subject | Grinding forces | en_US |
| dc.subject | Grinding wheel structure | en_US |
| dc.subject | Surface roughness | en_US |
| dc.title | An investigation into the influences of grinding wheel structure on surface roughness and grinding forces | en_US |
| dc.title.alternative | Taş dokusunun yüzey pürüzlülü?ü ve taşlama kuvvetleri?ne etki?leri?ni?n i?ncelenmesi? | en_US |
| dc.type | Article | en_US |
