Modelling and optimization of the cutting conditions in hard turning of high-alloy white cast iron (Ni-Hard)

Basit Öğe Kaydı
dc.authoridYucel, Emre/0000-0002-0296-4626
dc.contributor.authorYucel, Emre
dc.contributor.authorGunay, Mustafa
dc.date.accessioned2024-09-29T16:05:00Z
dc.date.available2024-09-29T16:05:00Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe aim of this study is to model and optimize the cutting conditions for the cutting force (F-c) and average surface roughness (R-a) that result from the machining of high-alloy white cast iron (Ni-Hard). The hard turning experiments were carried out on a CNC lathe with ceramic and CBN inserts. Cutting tool material, cutting speed, feed rate and depth of cut were chosen as the cutting conditions (control factors). Taguchi's L-18 orthogonal array was used for design of experiment. Optimum levels of the cutting conditions were determined using signal-to-noise (S/N) ratio, which was calculated for machining output variables (F-c and R-a) according to the the-smaller-the-better' approach. The effects of the cutting conditions on machining output variables were evaluated by the analysis of variance. The analysis of variance results showed that the depth of cut and feed rate were the most significant factors on F-c and R-a, respectively. Besides, the optimal cutting conditions for main cutting force and surface roughness were found at the different levels.en_US
dc.description.sponsorshipKarabuk University Unit of Scientific Research Projects [KBU-BAP-C-11-Y 027]en_US
dc.description.sponsorshipThis research work was funded by Karabuk University Unit of Scientific Research Projects (Project No: KBU-BAP-C-11-Y 027). The authors express appreciation for this support.en_US
dc.identifier.doi10.1177/0954406212471755
dc.identifier.endpage2290en_US
dc.identifier.issn0954-4062
dc.identifier.issn2041-2983
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-84886911460en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage2280en_US
dc.identifier.urihttps://doi.org/10.1177/0954406212471755
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6446
dc.identifier.volume227en_US
dc.identifier.wosWOS:000325707400012en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofProceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectHard turningen_US
dc.subjectNi-Harden_US
dc.subjectTaguchi methoden_US
dc.subjectcutting forceen_US
dc.subjectsurface roughnessen_US
dc.titleModelling and optimization of the cutting conditions in hard turning of high-alloy white cast iron (Ni-Hard)en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu