Tool wear patterns and their promoting mechanisms in hybrid cooling assisted machining of titanium Ti-3Al-2.5V/grade 9 alloy
Küçük Resim Yok
Tarih
2022
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Sci Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Hybrid lubri-cooling is a latest technology that provides synergistic cooling and lubrication effect in the machining area especially in the cutting of titanium and its alloys. In this current study, cryogenic-LN2, minimum quantity lubrication (MQL), and hybrid cryogenic LN2-MQL are applied and compared against dry medium in perspective of in-depth analysis of tool flank wear, EDS mapping, and intensity of tool wear. Experimental results showed that in comparison with dry, hybrid LN2-MQL substantially reduced the tool flank and rake wear fol-lowed by LN2, MQL, and dry conditions, respectively. Additionally, the SEM and EDS analysis depicted relatively less severe wear and chemical elements adhesion on the tool's main cutting edge, while turning titanium alloy under a hybrid LN2-MQL lubri-cooling environment. In addition, the dry condition has maximum value of tool wear progressions i.e., 1.04 mm and hybrid LN2-MQL have 0.06 mm while machining titanium alloys. When tool wear is evaluated from a tribological point of view, the reduction in flank wear value compared to dry machining is 89.4 %, 92.3 % and 94.2 % owing to MQL, LN2, MQL and hybrid LN2-MQL cutting strategies. In terms of crater wear, the improvement was 87.7 %, 90.4 % and 90.8 % thanks to MQL, LN2, MQL and hybrid LN2-MQL.
Açıklama
Anahtar Kelimeler
Lubri-cooling, Tribology, Wear, Titanium, Ti-3Al-2.5V/grade 9 Turning
Kaynak
Tribology International
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
174
