Structural performance of the finger-jointed strength of some wood species with different joint configurations

Basit Öğe Kaydı
dc.contributor.authorOzcifci, Ayhan
dc.contributor.authorYapici, Fatih
dc.date.accessioned2024-09-29T15:55:15Z
dc.date.available2024-09-29T15:55:15Z
dc.date.issued2008
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study was conducted to evaluate the effects of adhesive type, wood species, and finger joint configurations on structural performance of the finger joint. The wood species studied were oriental beech (Fagus orientalis lipsky.), oak (Quercus robur), Scots pine (Pinus sylvestris lipsky.), poplar (Populus tremula lipsk.) and Uludag fir (Abies bormulleriana Matff.) and adhesives were poly(vinyl acetate) (PVAc), Desmodur-VTKA (D-VTKA). However, there is little information available concerning the bending strength and modulus of elasticity for finger joints in these field. In this study, it was aimed to determine the bending strength and modulus of elasticity for finger joints. For this purpose, samples were tested according to the TS EN 310 standard. It was observed that the highest bending strength and modulus of elasticity were obtained in beech control (solid wood) samples. As for the finger joints, after the control samples, the highest bending strength value (57.4 N/mm(2)) was obtained from Oriental beech wood samples having a 21 mm finger length and bonded with PVAc adhesive, the highest modulus of elasticity (8885.3 N/mm(2)) was obtained from beech wood samples having a 21 mm finger length and bonded with PVAc adhesive. As a result of the effects of finger joints on bending strength and modulus elasticity test, if the length of finger joints increases up to 21 mm, the properties of bending strength increase. (C) 2007 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.conbuildmat.2007.03.020
dc.identifier.endpage1550en_US
dc.identifier.issn0950-0618
dc.identifier.issn1879-0526
dc.identifier.issue7en_US
dc.identifier.scopus2-s2.0-43049122781en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1543en_US
dc.identifier.urihttps://doi.org/10.1016/j.conbuildmat.2007.03.020
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4534
dc.identifier.volume22en_US
dc.identifier.wosWOS:000256141400029en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofConstruction and Building Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectfinger jointsen_US
dc.subjectbonding strengthen_US
dc.subjectmodulus of elasticityen_US
dc.subjectadhesivesen_US
dc.subjectwood materialsen_US
dc.titleStructural performance of the finger-jointed strength of some wood species with different joint configurationsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu