The effect of surface roughness on tensile strength of the medium density fiberboard (MDF) overlaid with polyvinyl chloride (PVC)

Basit Öğe Kaydı
dc.authoridKilic, Murat/0000-0001-6113-8634
dc.authoridALTUN, Suat/0000-0002-7080-7489
dc.contributor.authorKilic, Murat
dc.contributor.authorBurdurlu, Erol
dc.contributor.authorAslan, Salih
dc.contributor.authorAltun, Suat
dc.contributor.authorTumerdem, Omer
dc.date.accessioned2024-09-29T15:57:52Z
dc.date.available2024-09-29T15:57:52Z
dc.date.issued2009
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe objective of this study is to determine the effect of the surface roughness on the tensile strength perpendicular to the surface of medium density fiberboard (MDF) overlaid with polyvinyl chloride (PVC). The surfaces of the MDF panels were sanded with four different grit abrasives, 220, 240, 280 and 320-grit, to create different roughness values. The roughness of the panel surfaces were determined in accordance with ISO 4288. The MDF panels were laminated with polyvinyl chloride (PVC) using a polyurethane-based adhesive. A total of 70 samples having the dimensions of 50 x 50 mm from the panels were prepared based on EN 326-1. The universal test machine was used for tensile strength. The test results were statistically analyzed and it was found that the sanding process decreases the surface roughness of the MDF and as the grit size of the abrasives increases, the surface roughness decreases. The surface roughness influences the tensile strength perpendicular to the surface of the overlaid samples. The most suitable surfacing type for lower cost and the highest tensile strength is the sanding with the 240-grit abrasive. (C) 2009 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2009.03.029
dc.identifier.endpage4583en_US
dc.identifier.issn0261-3069
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-67649400322en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage4580en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2009.03.029
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5065
dc.identifier.volume30en_US
dc.identifier.wosWOS:000268453500086en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectProfiled Areasen_US
dc.subjectWooden_US
dc.titleThe effect of surface roughness on tensile strength of the medium density fiberboard (MDF) overlaid with polyvinyl chloride (PVC)en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu