Investigation of microstructure and wear behaviors of al matrix composites reinforced by carbon nanotube

Basit Öğe Kaydı
dc.authoridYILDIRIM, MUSA/0000-0002-2464-1182
dc.contributor.authorYildirim, Musa
dc.contributor.authorOzyurek, Dursun
dc.contributor.authorGuru, Metin
dc.date.accessioned2024-09-29T16:02:54Z
dc.date.available2024-09-29T16:02:54Z
dc.date.issued2016
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the effect of CNT amount in Al-CNT composites produced by adding carbon nanotube (CNT) to 7075 Al alloy in various amounts on microstructure and wear behaviors of aluminum matrix composites was investigated. CNT was added to 7075 Al alloy powder at five different amounts. The powders were mechanically milled for 2 hours. Mechanical milled powders were cold pressed and then pre-shaped by hot pressing. Pre-shaped samples were sintered for 1 hour under 10(6) millibar in 580 degrees C. Microstructure examinations, hardness measurements, and wear tests were carried out. The results show that CNT's in the microstructure were agglomerated as nanotube amount increases and there was no uniform distribution. The highest hardness value was obtained in AMC reinforced with 1% CNT while it is seen that hardness of the composite decreases and weight loss increases as CNT amount increases.en_US
dc.description.sponsorshipKarabuk University Scientific Research Projects Department [KBU-BAP-15/1-DR-003]en_US
dc.description.sponsorshipThe authors are pleased to acknowledge the financial support for this study from Karabuk University Scientific Research Projects Department (KBU-BAP-15/1-DR-003).en_US
dc.identifier.doi10.1080/1536383X.2016.1182504
dc.identifier.endpage473en_US
dc.identifier.issn1536-383X
dc.identifier.issn1536-4046
dc.identifier.issue7en_US
dc.identifier.scopus2-s2.0-84978107397en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage467en_US
dc.identifier.urihttps://doi.org/10.1080/1536383X.2016.1182504
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5785
dc.identifier.volume24en_US
dc.identifier.wosWOS:000380155500008en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Incen_US
dc.relation.ispartofFullerenes Nanotubes and Carbon Nanostructuresen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectmetal matrix compositesen_US
dc.subjectcarbon nanotubesen_US
dc.subjectmicrostructureen_US
dc.subjecthardnessen_US
dc.subjectwear behaviorsen_US
dc.titleInvestigation of microstructure and wear behaviors of al matrix composites reinforced by carbon nanotubeen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu