Statistical model for comparing the performance of two coagulants using response surface model
Küçük Resim Yok
Tarih
2022
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Desalination Publ
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this research, the performances of modified tannin and aluminium sulfate (alum) for stabilized leachate treatment were investigated and compared using coagulant dosage, pH, and rapid mixing speed as the input variables. Four different responses were used to compare the treatment performances; the responses are, chemical oxygen demand (COD), color, ammoniacal nitrogen (NH3??? N) and total suspended solids (TSS). The results of the analysis for 36 experiments showed that the optimum operating conditions for 1% modified tannin and 10% alum are a coagulant dosage of 6 mL, a pH of 9 and a rapid mixing speed of 100 rpm. The optimum removal efficiencies of COD, color, NH3???N and TSS using 1% modified tannin were 42.86%, 54.38%, 39.39% and 60.33% respectively, and using 10% alum were 60.71%, 63.09%, 42.42% and 60.33%, respectively. The findings revealed that the effectiveness of modified tannin for the treatment of landfill leachate was significant using a ten-time lower dosage concentration than alum. This study will help better understanding the behaviour of organic and inorganic coagulants for wastewater treatments using the same polynomial model.
Açıklama
Anahtar Kelimeler
Tannin, Alum, Coagulation, Face-centered design, Polynomial model, Removal
Kaynak
Desalination and Water Treatment
WoS Q Değeri
Q4
Scopus Q Değeri
Q3
Cilt
256
