Microstructure, Tribological, and Electrochemical Characterization of Hardfacing WC-Ni-Cr on AISI 1045 Carbon Steel Alloy
Küçük Resim Yok
Tarih
2022
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The aim of present work is to study the effect of WC-Ni-Cr hardfacing on the mechanical properties and corrosion behavior of AISI 1045 type substrate alloy steel. The hardfacing coatings were obtained by oxy-acetylene process with and without C-Mo-Al-Ni interlayer. The WC-Ni-Cr hardfacing samples were characterized by scanning electron microscopy coupled with energy-dispersive spectroscopy-ray diffraction, microhardness measurements, 2D-surface roughness, ball-on-disk wear as well as electrochemical analysis. The obtained results show that the hardfacing coatings correspond to tungsten carbide complex which consists of WC, W2C, Fe6W6C and Fe3Ni phases of 1000-1250 HV hardness and WC particles were distributed homogeneously in Ni-Cr matrix. The wear rate of WC-Ni-Cr hardfacing was reduced significantly by 10 times less than WC-Ni coating under the same condition. On the others hand, porosities and microcracks were observed more in the samples with an interlayer compared to coatings without interlayer. The obtained result showed that WC-Ni-Cr improved the protection against corrosion for the substrate steel. Present study deduced that the protected steel samples by hardfacing without an interlayer resisted better than those having an interlayer.
Açıklama
Anahtar Kelimeler
corrosion, flame spray, hardfacing, interlayer, oxy-acetylene process, wear
Kaynak
Journal of Materials Engineering and Performance
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
31
Sayı
9
