Investigation of the Effect of Zirconium Amount on Grain Size and Wear Performance in TZM Alloys Produced by Mechanical Alloying Method

Basit Öğe Kaydı
dc.authoridsimsek, dogan/0000-0002-5509-9314
dc.contributor.authorSirali, Haktan
dc.contributor.authorSimsek, Dogan
dc.contributor.authorOzyurek, Dursun
dc.date.accessioned2024-09-29T15:54:43Z
dc.date.available2024-09-29T15:54:43Z
dc.date.issued2022
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the relation between grain size, hardness and wear performance of Titanium-Zirconium-Molybdenum (TZM) alloys with different amounts (0.06, 0.07, 0.08 and 0.09 wt%) of Zr added by the mechanical alloying method was investigated. As a result of the studies, it was observed that the number of pores in the structure increased with the increase in the amount of Zr, while there was a decrease in the grain size. In the hardness and density results, it was observed that while the hardness values increased with increasing Zr amount, there was a decrease in the density values. As a result of the wear tests, the lowest weight loss at 10-30 N loads was obtained in the TZM alloy with the highest Zr added (0.09% Zr). The lowest friction coefficient in the friction coefficient results was obtained in TZM alloy with 0.09% Zr added.en_US
dc.identifier.doi10.1007/s12666-021-02510-4
dc.identifier.endpage812en_US
dc.identifier.issn0972-2815
dc.identifier.issn0975-1645
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85122661973en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage805en_US
dc.identifier.urihttps://doi.org/10.1007/s12666-021-02510-4
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4219
dc.identifier.volume75en_US
dc.identifier.wosWOS:000740399600002en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Indiaen_US
dc.relation.ispartofTransactions of the Indian Institute of Metalsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTZM alloyen_US
dc.subjectZirconiumen_US
dc.subjectGrain sizeen_US
dc.subjectWearen_US
dc.titleInvestigation of the Effect of Zirconium Amount on Grain Size and Wear Performance in TZM Alloys Produced by Mechanical Alloying Methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu