Wear behaviors at different temperatures of ZrO2 reinforced A356 matrix composites produced by mechanical alloying method

Basit Öğe Kaydı
dc.authoridsimsek, dogan/0000-0002-5509-9314
dc.contributor.authorSimsek, Dogan
dc.contributor.authorOzyurek, Dursun
dc.contributor.authorSalman, Serdar
dc.date.accessioned2024-09-29T16:03:24Z
dc.date.available2024-09-29T16:03:24Z
dc.date.issued2022
dc.departmentKarabük Üniversitesien_US
dc.description.abstractPurpose The purpose of this study, the tribological behaviors at different temperatures of aluminium matrix composites (AMCs) with different amounts of ZrO2 added were investigated. Design/methodology/approach Aluminium graphite (A356/2 wt% graphite (solid lubricant)) composite powders prepared by adding four different amounts (3 wt%, 6 wt%, 9 wt% and 12 wt%) of Zirconia (ZrO2) to the matrix were mechanically alloyed for 4 h. Wear tests were conducted at five different temperatures (20 degrees C, 100 degrees C, 180 degrees C, 260 degrees C and 340 degrees C) and for three different sliding distances (53 m, 72 m and 94 m) on the pin-on-disc type wear tester. Findings Results of the study showed that the highest hardness and density value were measured for 12% ZrO2 added AMC material. Wear test results showed that weight loss increases with increasing temperature; weight loss decreases at all temperatures with the increasing amount of reinforcement in the matrix. Originality/value In this paper, the tribological properties of aluminium matrix composites produced by the mechanical alloying method by adding different amounts of ZrO2 were determined by simulating the tribological properties at different loads and temperatures.en_US
dc.identifier.doi10.1108/ILT-10-2021-0416
dc.identifier.endpage471en_US
dc.identifier.issn0036-8792
dc.identifier.issn1758-5775
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85124988552en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage463en_US
dc.identifier.urihttps://doi.org/10.1108/ILT-10-2021-0416
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6063
dc.identifier.volume74en_US
dc.identifier.wosWOS:000758681900001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEmerald Group Publishing Ltden_US
dc.relation.ispartofIndustrial Lubrication and Tribologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectA356 alloyen_US
dc.subjectCompositeen_US
dc.subjectGraphiteen_US
dc.subjectZrO2en_US
dc.subjectHot wearen_US
dc.titleWear behaviors at different temperatures of ZrO2 reinforced A356 matrix composites produced by mechanical alloying methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu