The theoretical and experimental investigation of blank holder forces plate effect in deep drawing process of AL 1050 material

Basit Öğe Kaydı
dc.authoridYasar, Mustafa/0000-0001-9354-3554
dc.contributor.authorDemirci, H. Ibrahim
dc.contributor.authorYasar, Mustafa
dc.contributor.authorDemiray, Kemal
dc.contributor.authorKarali, Mehmet
dc.date.accessioned2024-09-29T15:57:52Z
dc.date.available2024-09-29T15:57:52Z
dc.date.issued2008
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe plastic forming process of sheet plate takes an important place in forming metals. The traditional sheet plate forming techniques used in industry are experimental and expensive methods. Prediction of the forming results, determination of the punching force, blank holder forces and the thickness distribution of the sheet metal will decrease the production cost and time of the material to be formed. With this aim, firstly simulation was realized with taking the contact model, material specifications into consideration by using non-linear explicit finite elements method (ANSYS LS-DYNA). In the analysis, the effects of fixed blank holder forces on the wall thickness distribution and wrinkles were examined. As a result of the analysis, without the sheet metal wrinkling or exceeding the tearing limits, for smooth drawings of blank holder the required forces were determined. The results were evaluated and experiments were done with the forces which were determined earlier. As a result of the experiments, which were done with the results obtained with finite elements method, 90% consistency between the experimental and theoretic results was seen. (c) 2007 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2007.01.008
dc.identifier.endpage532en_US
dc.identifier.issn0264-1275
dc.identifier.issn1873-4197
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-35349031577en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage526en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2007.01.008
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5057
dc.identifier.volume29en_US
dc.identifier.wosWOS:000251487900027en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFinite-Element Techniquesen_US
dc.subjectSimulationen_US
dc.subjectCupsen_US
dc.titleThe theoretical and experimental investigation of blank holder forces plate effect in deep drawing process of AL 1050 materialen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu