Effects of machining method and grain orientation on the bonding strength of some wood species

Basit Öğe Kaydı
dc.contributor.authorOzcifci, Ayhan
dc.contributor.authorYapici, Fatih
dc.date.accessioned2024-09-29T15:57:41Z
dc.date.available2024-09-29T15:57:41Z
dc.date.issued2008
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study was conducted to determine the effects of various machining methods and grain orientation on bonding strength of some wood species. For this purpose, Oriental beech (Fagus orientalis Lipsky.), Oak (Quercus robur), Scotch pine (Pinus sylvestris L.), Poplar (Populus tremula L.) and Uludag fir (Abies bornmulleriana Matff.) were used as raw materials. Phenol-formaldehyde (PF), poly (vinyl-acetate) (PVAc), polyurethane based Desmodur-VTKA (D-VTKA) and urea-formaldehyde (UF) adhesives were applied to one surface of the test samples. Bonding strength tests (based on TS EN 205) were applied on the connection surface. The test samples were machined with circular saw, band saw and thickness planer. The results indicated that the highest bonding strength was obtained from Oriental beech wood samples bonded with PVAc adhesive (14.83 N/mm(2)), while Poplar samples bonded with D-VTKA had the lowest values (2.99 N/mm(2)). In addition, the machined surface of the tangential direction had higher bonding strength than that of the radial direction. (C) 2007 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.jmatprotec.2007.08.043
dc.identifier.endpage358en_US
dc.identifier.issn0924-0136
dc.identifier.issue1-3en_US
dc.identifier.scopus2-s2.0-42949131082en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage353en_US
dc.identifier.urihttps://doi.org/10.1016/j.jmatprotec.2007.08.043
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4953
dc.identifier.volume202en_US
dc.identifier.wosWOS:000257095200043en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofJournal of Materials Processing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectcircular sawen_US
dc.subjectmachiningen_US
dc.subjectprocessesen_US
dc.subjectbonding strengthen_US
dc.subjectadhesivesen_US
dc.subjectwooden_US
dc.titleEffects of machining method and grain orientation on the bonding strength of some wood speciesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu