Mechanical Properties of Powder Metallugry (Ti-6Al-4V) with Hot Isostatic Pressing

Basit Öğe Kaydı
dc.contributor.authorAbdulla, Elfghi, M.
dc.contributor.authorGunay, M.
dc.date.accessioned2024-09-29T16:16:10Z
dc.date.available2024-09-29T16:16:10Z
dc.date.issued2020
dc.departmentKarabük Üniversitesien_US
dc.description.abstractTitanium alloys are widely used due to their high performance and low density in comparison with iron-based alloys. Their applications extend to aerospace and military in order to utilize their high resistance for corrosion. Understanding the mechanical properties and microstructure of titanium alloys is critical for performance optimization, as well as their implications on strength, plasticity, and fatigue. Ti-6Al-4V is an %+' two-phase alloy and is considered one of the most commonly used titanium alloys for weight reduction and high-performance. To avoid manufacturing defects, such as porosity and composition segregation, Hot Isostatic Pressing (HIP) is used to consolidate alloy powder. The HIP method is also used to facilitate the manufacturing of complex structures that cannot be made with forging and casting. In the current research, Ti-6Al- 4V alloys were manufactured with HIP and the impact on heat treatment under different temperatures and sintering durations on the performance and microstructure of the alloy was studied. The results show changes in mechanical properties and microstructure with the increase of temperature and duration. © 2020, Dr D. Pylarinos. All rights reserved.en_US
dc.identifier.doi10.48084/etasr.3522
dc.identifier.endpage5642en_US
dc.identifier.issn2241-4487
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85119989890en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage5637en_US
dc.identifier.urihttps://doi.org/10.48084/etasr.3522
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8871
dc.identifier.volume10en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherDr D. Pylarinosen_US
dc.relation.ispartofEngineering, Technology and Applied Science Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjecthot isostatic pressing (HIP)en_US
dc.subjectTi-6-4en_US
dc.subjecttitanium alloyen_US
dc.titleMechanical Properties of Powder Metallugry (Ti-6Al-4V) with Hot Isostatic Pressingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu