The Effect of Ti Addition and Aging on Wear Behavior of AlMgSi Alloys Reinforced with In Situ Al3Ti Particles

Basit Öğe Kaydı
dc.contributor.authorSun, Yavuz
dc.date.accessioned2024-09-29T15:51:29Z
dc.date.available2024-09-29T15:51:29Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe purpose of this study is to investigate the effects of Ti addition (1 and 2% Ti) and aging heat treatment on the mechanical and wear characteristics of Al-12Si-20Mg cast alloys. In preliminary studies conducted to determine the aging parameters, cast alloys were kept at 550 A degrees C for 2 h before being quenched into water and aged at 200 A degrees C for five different periods (3, 6, 9, 12, and 15 h). As the specimen aged for 12 h had the highest hardness value, all the specimens were aged at 200 A degrees C for 12 h. The microstructures of the as-cast and aged specimens were analyzed using an optical microscope and a scanning electron microscope. The hardness of the investigated alloys was measured by micro-hardness test. The wear tests were carried out using the pin-on-disk model wear test apparatus, and the results were evaluated according to weight loss. According to the wear test results, the wear behavior of the investigated alloys changed depending on the aging heat treatment applied and the load. While Ti addition and the aging heat treatment applied reduce the weight loss at low loads (5 N), they increase the weight loss at higher loads (10 and 20 N).en_US
dc.identifier.doi10.1007/s11665-012-0217-0
dc.identifier.endpage169en_US
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84872003088en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage162en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-012-0217-0
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4102
dc.identifier.volume22en_US
dc.identifier.wosWOS:000312712900019en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Materials Engineering and Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectaging heat treatmenten_US
dc.subjectin-situ compositesen_US
dc.subjectnon-ferrous metals and alloysen_US
dc.subjectwearen_US
dc.titleThe Effect of Ti Addition and Aging on Wear Behavior of AlMgSi Alloys Reinforced with In Situ Al3Ti Particlesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu