Investigation of fatigue properties of shot peened and plasma nitrocarburized P/M FC0205 steel

Basit Öğe Kaydı
dc.contributor.authorBasaran, Ali
dc.contributor.authorKurgan, Naci
dc.contributor.authorVarol, Remzi
dc.date.accessioned2024-09-29T15:54:35Z
dc.date.available2024-09-29T15:54:35Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractOne of the widely used powder metal materials in automotive industry, which is copper steel FC 0205 (Fe + 2% Cu + 0.5% C), was used in this study. The pressed samples has been prepared at the compression pressure of 680 MPa and sintered in conventional furnace at 1120 degrees C for 30 minutes. The samples with 7 Mg/m(3) densities were used as fatigue and shot peening processes. Shot peening were applied with 20A and 32A and the others were not peened. Plasma nitrocarburizing process was performed at 555 degrees C for 2 hours under 600-900 Pa pressure. Fatigue tests were conducted at room temperature on a rotating bending type fatigue test device. It was determined that shot peening should be used where increased fatigue strength is needed, and plasma nitrocarburizing should be preferred where surface hardness is required, and plasma nitrocarburizing after shot peening process is much more useful.en_US
dc.identifier.doi10.1007/s12206-013-0615-8
dc.identifier.endpage2322en_US
dc.identifier.issn1738-494X
dc.identifier.issue8en_US
dc.identifier.scopus2-s2.0-84884509082en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage2315en_US
dc.identifier.urihttps://doi.org/10.1007/s12206-013-0615-8
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4168
dc.identifier.volume27en_US
dc.identifier.wosWOS:000324548300011en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherKorean Soc Mechanical Engineersen_US
dc.relation.ispartofJournal of Mechanical Science and Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPowder metallurgyen_US
dc.subjectPlasma nitrocarburizingen_US
dc.subjectShot peeningen_US
dc.subjectFatigue strengthen_US
dc.titleInvestigation of fatigue properties of shot peened and plasma nitrocarburized P/M FC0205 steelen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu