MIG welding of AISI 409 and Ç1010 steel using an austenitic electrode and investigation of their mechanical properties

Basit Öğe Kaydı
dc.contributor.authorKilinçer, S.
dc.contributor.authorKahraman, N.
dc.date.accessioned2024-09-29T16:22:22Z
dc.date.available2024-09-29T16:22:22Z
dc.date.issued2009
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, joinability of dissimilar metals by using gas metal arc welding was investigated. For this aim, a ferritic stainless steel (AISI 409) and a low carbon steel (Ç 1010) were joined at different welding parameters through automated robotic gas metal arc welding process using an austenitic filler metal. Mechanical and metallographic properties of the specimens were obtained by means of tensile test, bending test, microhardness test, impact test and optical microscopy examinations. In the tensile tests, fracture always occurred in the low carbon steel portion of the welded specimens away from the weld zone. Visual observation of the bended specimens showed no crack and tears. For all welding parameters, hardness test results showed that weld metal gave higher hardness value than HAZ and base metal. From the results of metallographic examination, it was seen that grain growth in the weld metal and HAZ increased with increasing heat input.en_US
dc.identifier.endpage31en_US
dc.identifier.issn1300-1884
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-65449158431en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage23en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/10009
dc.identifier.volume24en_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDissimilar weldingen_US
dc.subjectFerritic stainless steelen_US
dc.subjectMIG weldingen_US
dc.subjectWelding roboten_US
dc.titleMIG welding of AISI 409 and Ç1010 steel using an austenitic electrode and investigation of their mechanical propertiesen_US
dc.title.alternativeAISI 409 ve Ç1010 çeli??i?n östeni?ti?k elektrod kullanarak MIG kaynak yöntemi? île bi?rleçti?ri?lmesi? ve mekani?k özelli?kleri?ni?n araştirilmasien_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu