Three-Point Bending Response of Corrugated Core Metallic Sandwich Panels Having Different Core Configurations – An Experimental Study

Basit Öğe Kaydı
dc.contributor.authorZurnaci, E.
dc.contributor.authorNalbant, M.
dc.contributor.authorGokkaya, H.
dc.contributor.authorSur, G.
dc.date.accessioned2024-09-29T16:16:10Z
dc.date.available2024-09-29T16:16:10Z
dc.date.issued2019
dc.departmentKarabük Üniversitesien_US
dc.description.abstractBending response of corrugated core metallic sandwich panels was studied experimentally under three-point bending loading. Two different core configurations were used: the corrugated monolithic core and the corrugated sliced core. The trapezoidal corrugated cores were manufactured from aluminum sheets via a sheet metal bending mould. After the sandwich panel samples were prepared, they were subjected to three-point bending tests. The load and displacement responses of the sandwich panels having different core configurations were obtained from the experimental testing. The influence of the core configuration on the three-point bending response and failure modes was then investigated. The experimental results revealed that the corrugated sliced core configuration exhibited an improved bending performance compared to the corrugated monolithic core configuration. © 2019, Dr D. Pylarinos. All rights reserved.en_US
dc.description.sponsorshipKarabük Üniversitesi, (KBUBAP-17-DR-458)en_US
dc.identifier.doi10.48084/etasr.2671
dc.identifier.endpage3984en_US
dc.identifier.issn2241-4487
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85122308184en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage3981en_US
dc.identifier.urihttps://doi.org/10.48084/etasr.2671
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8878
dc.identifier.volume9en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherDr D. Pylarinosen_US
dc.relation.ispartofEngineering, Technology and Applied Science Researchen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectbending responseen_US
dc.subjectcorrugated core configurationsen_US
dc.subjectfailure modesen_US
dc.subjectmetallic sandwich panelen_US
dc.subjectthree-point bendingen_US
dc.titleThree-Point Bending Response of Corrugated Core Metallic Sandwich Panels Having Different Core Configurations – An Experimental Studyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu