Joining of copper and steel plates by shielded metal arc and tig welding methods and investigation of their interface properties

Basit Öğe Kaydı
dc.contributor.authorDurgutlu, A.
dc.contributor.authorKahraman, N.
dc.contributor.authorGülenç, B.
dc.date.accessioned2024-09-29T16:22:24Z
dc.date.available2024-09-29T16:22:24Z
dc.date.issued2005
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, low carbon steel and copper plates were welded to each other by shielded metal arc and tungsten arc welding processes. Mechanical and microstructural properties of the joints were investigated. Tensile, bending and hardness tests of the welded specimens were conducted. Optical microscopy and SEM studies were carried out, in order to make the microstructural evaluation. During the tensile tests of the welded specimens, fracture occurred in the copper side apart from the weld region. Macro examination of the bended specimens showed no crack and tears. The results showed that hardnesses of the shielded metal arc welded specimens were higher than those of tungsten arc welded samples. However, hardness values of the weld metal were found to be lower than those of the low carbon steel but it was found to be higher than those of the copper side. From the results of metallographic examination, a uniform transition from parent metal to weld metal was observed in the weld region and more grain growth was observed in TIG welding specimens due to higher heat input when compared to the shielded metal arc welded samples.en_US
dc.identifier.endpage189en_US
dc.identifier.issn1300-1884
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-22144459812en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage183en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/10044
dc.identifier.volume20en_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCopperen_US
dc.subjectDissimilar metals weldingen_US
dc.subjectShielded metal arc weldingen_US
dc.subjectTungsten arc weldingen_US
dc.titleJoining of copper and steel plates by shielded metal arc and tig welding methods and investigation of their interface propertiesen_US
dc.title.alternativeBakir ve Çeli?k Levhalarin Örtülü Elektrod ve Tig Kaynak Yöntemleri? İle Bi?rleşti?ri?lmesi? ve Arayüzey Özelli?kleri?ni?n İncelenmesi?en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu