Corrosion and Wear Behaviour of Boronized high Carbon and Chromium Cast Steel

Basit Öğe Kaydı
dc.authoridAHLATCI, Hayrettin/0000-0002-6766-4974
dc.contributor.authorAhlatci, Hayrettin
dc.contributor.authorYargul, Gorkem
dc.contributor.authorCug, Harun
dc.contributor.authorCevik, Engin
dc.contributor.authorYasin, Suleyman
dc.contributor.authorSun, Yavuz
dc.date.accessioned2024-09-29T16:06:53Z
dc.date.available2024-09-29T16:06:53Z
dc.date.issued2013
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe purpose of this study was to examine the effect of boronising heat treatment on the corrosion behaviour (in two different corrosive media) and wear properties (on two different counter sliding discs) of the DIN 1.4777 quality cast steel containing 1.7% C, 30% Cr and 1.1% Si. The steel supplied as cast was exposed to homogenisation heat treatment at 1150 degrees C for 3,5 hours and then to boronising heat treatment at 900 degrees C for 8 hours using the powder of Ekabor 2. An optical light microscope, SEM and XRD analyses were used to conduct microstructural characterisation of the steel investigated. Electrochemical potentio-dynamic polarisation measurements were taken to evaluate corrosion behaviours of the examined steels. Wear tests were conducted in a pin-on-disc type wear device by using a load between 10 N and 60 N. While the corrosion resistance of the boronising heat treated steel deteriorated by the pitting damage mechanism within corrosive media, uniform corrosion damage enhanced the corrosion resistance of the examined boronised steel. Oxidative adhesion, cracking of oxide and/or boride layer, and severe plastic deformation mechanisms were dominant during the wear tests. Severe plastic deformation and cracking of the oxide and/or boride layer caused wear mechanism to transform from mild to severe.en_US
dc.description.sponsorshipKarabuk University Project of Researchment and Development [KBU-BAP-C-11.Y011]en_US
dc.description.sponsorshipThis work was supported by Karabuk University Project of Researchment and Development (Code: KBU-BAP-C-11.Y011).en_US
dc.identifier.doi10.2355/isijinternational.53.887
dc.identifier.endpage893en_US
dc.identifier.issn0915-1559
dc.identifier.issn1347-5460
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-84879227052en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage887en_US
dc.identifier.urihttps://doi.org/10.2355/isijinternational.53.887
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7109
dc.identifier.volume53en_US
dc.identifier.wosWOS:000319547200020en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherIron Steel Inst Japan Keidanren Kaikanen_US
dc.relation.ispartofIsij Internationalen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectcorrosive mediaen_US
dc.subjectDIN1.4777 quality steelen_US
dc.subjectboronising heat treatmenten_US
dc.subjectwearen_US
dc.subjectcounter sliding discen_US
dc.titleCorrosion and Wear Behaviour of Boronized high Carbon and Chromium Cast Steelen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu