Effects of Zn, Nd, and Ca addition on the microstructure, mechanical and corrosion properties of biodegradable Mg-Ag alloys

Basit Öğe Kaydı
dc.contributor.authorTuren, Yunus
dc.contributor.authorElen, Levent
dc.date.accessioned2024-09-29T16:01:09Z
dc.date.available2024-09-29T16:01:09Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, casting, extrusion, biocorrosion and corrosive wear properties of 0.5 wt.% (Zn, Ca, and Nd) element added Mg-3%Ag alloys were investigated. As a result of the experimental studies, it was observed that the grains in the Zn and Ca added as-cast alloys became thinner, and thus the mechanical properties of the investigated alloys such as yield strength and hardness were improved. At the same time, the applied extrusion process provided an increase in the mechanical properties by refining the grain structure of the investigated alloys. As a result of in vitro tests, larger pitting was observed in as-cast alloys, while smaller and shallower corrosion pits were observed in extruded alloys. In the corrosive wear tests, the wear rate of extruded alloys generally showed a decreasing trend. However, the composition of both as-cast and extruded Mg-3% Ag-0.5%Zn-0.5% Ca was the alloy that exhibited the lowest value in terms of the wear rate.en_US
dc.description.sponsorshipScientific and Technological Research Council of Turkey (TUBITAK) [119M645]en_US
dc.description.sponsorshipAcknowledgments This research is supported by The Scientific and Technological Research Council of Turkey (TUBITAK) with 1002 - Short Term R&D Funding Program, project no. 119M645.en_US
dc.identifier.doi10.1051/metal/2022111
dc.identifier.issn2271-3646
dc.identifier.issn2271-3654
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85153407377en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1051/metal/2022111
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5539
dc.identifier.volume120en_US
dc.identifier.wosWOS:000970349600004en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEdp Sciences S Aen_US
dc.relation.ispartofMetallurgical Research & Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMg-Ag alloysen_US
dc.subjectmicrostructureen_US
dc.subjectmechanical propertiesen_US
dc.subjectbiodegradableen_US
dc.subjectcorrosive wearen_US
dc.titleEffects of Zn, Nd, and Ca addition on the microstructure, mechanical and corrosion properties of biodegradable Mg-Ag alloysen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu