The Experimental Investigation of Punching of the AM60 and AZ61 Magnesium Alloy Sheets by Using Varied Punch Shapes

Basit Öğe Kaydı
dc.contributor.authorCug, H.
dc.contributor.authorKhalifa, S.S.M.
dc.contributor.authorGürün, H.
dc.date.accessioned2024-09-29T16:16:15Z
dc.date.available2024-09-29T16:16:15Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe using of magnesium alloys for industrial sheet metal part production has become increasingly common in recent years. This research aims to characterize the effects of the cutting-edge shapes of the punches on the blanking forces and the sheared edge qualities in the blanking/piercing operations of magnesium alloy sheets. Magnesium sheets (AM60 and AZ61) were produced by casting and rolling processes. AM60 and AZ61 Mg alloys produced by casting were rolled by using two different speeds, 2.5 m/min and 7.5 m/min. Material thickness was adjusted to three mm in the rolling process. Blanking tests were carried out on a die-set and hydraulic press by varying shaped punches. In the experimental studies, flat-ended, concave shaped, and 16° angled punches were used. A loadcell was fixed to the experimental setup to determine the blanking forces. The results showed that the AM60 alloy was more resistant to shearing than the AZ61. The lowest blanking force was obtained by use of the 16° angled punch. It was determined that the using of flat-ended punches for blanking operations was more convenient according to the usage purpose of the parts while all three punches can be used for piercing operations. © 2023 University of Kuwait. All rights reserved.en_US
dc.identifier.doi10.36909/jer.12813
dc.identifier.endpage339en_US
dc.identifier.issn2307-1885
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85156148356en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage331en_US
dc.identifier.urihttps://doi.org/10.36909/jer.12813
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8966
dc.identifier.volume11en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherUniversity of Kuwaiten_US
dc.relation.ispartofJournal of Engineering Research (Kuwait)en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAM60en_US
dc.subjectAZ61en_US
dc.subjectBlankingen_US
dc.subjectBlanking forceen_US
dc.subjectPunch shapeen_US
dc.subjectRollingen_US
dc.titleThe Experimental Investigation of Punching of the AM60 and AZ61 Magnesium Alloy Sheets by Using Varied Punch Shapesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu