Comparison of experimental, analytical and simulation results for hot rolling of S275JR quality steel
Küçük Resim Yok
Tarih
2020
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Hot rolling allows the material to be shaped in successive steps in different steps since the material is at a temperature above 0.5 Tm which is the recrystallization temperature and gives the possibility of deformation with large deformation rates. In the industry, direct applications show negative effects on time and cost. Practical processes by experimenting can be completed in short periods in some symmetrical profile section products and long periods in some asymmetric profile section products. Finite element method (FEM) can be applied in order to predict the results obtained by simulating the designed calibrations in the computer environment before testing in the rolling mill. In this study, the production of HEA 240 profile in S275JR quality is experimentally made in 21 passes and the geometric dimensions of the first three passes of this structure was compared with 3D FEM analysis results. The comparison results are compatible and high similarity ratio as 95-99.1% was found. Following to this, the analytically calculated dimensions of calibrated IPE 140 pro- file in S275JR quality was compared by the verified 3D FEM analysis. Considering the first 5 passes of 15 passes for saving time, the simulation and analytical results are in close rela- tionship less than 5% deviation ratio. It is possible to say that this simulation, which has small acceptable differences, has a significant effect on minimizing losses in production processes and achieving production targets. (C) 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Açıklama
Anahtar Kelimeler
Hot rolling, Finite element analysis, S275JR steel, Analytical calculation
Kaynak
Journal of Materials Research and Technology-Jmr&T
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
9
Sayı
3
