An Investigation of Microstructure and Mechanical Properties of Sn-9Zn-xCr Alloys Produced by Investment Casting Method

Basit Öğe Kaydı
dc.authoridYAVUZER, Bekir/0000-0001-8984-774X
dc.contributor.authorYavuzer, B.
dc.contributor.authorOzyurek, D.
dc.date.accessioned2024-09-29T16:05:13Z
dc.date.available2024-09-29T16:05:13Z
dc.date.issued2017
dc.departmentKarabük Üniversitesien_US
dc.description6th Congress and Exhibition on International Advances in Applied Physics and Materials Science (APMAS) -- JUN 01-03, 2016 -- Istanbul, TURKEYen_US
dc.description.abstractIn this study, the microstructure and mechanical properties were investigated of different amount Cr (0.1%, 0.5%, 0.9%) added Sn-9Zn eutectic alloys and Weibull statistical analyses were evaluated using ultimate tensile strength. Pure elements (Sn, Zn, Cr) were used for production of alloys and pre-alloying was done and waited in the electrical resistance furnace at 450 degrees C for 1 h to homogenized and poured as ingot in plaster moulds. Then pre-alloyed Sn-9Zn-x Cr ingots were melted and poured at 300 degrees C in ceramic moulds prepared investment casting method. As a result of the study, the highest hardness and ultimate tensile strength values were measured in the Sn-9Zn alloy with 0.1% Cr. It was determined that while ultimate tensile strength was decreased, percentage of elongation was increased by increase of Cr amount. According to the Weibull statistical analyses results, the highest Weibull module was calculated by Sn-9Zn-0.1Cr alloy ultimate tensile strength values.en_US
dc.identifier.doi10.12693/APhysPolA.131.102
dc.identifier.endpage105en_US
dc.identifier.issn0587-4246
dc.identifier.issn1898-794X
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85016176764en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage102en_US
dc.identifier.urihttps://doi.org/10.12693/APhysPolA.131.102
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6574
dc.identifier.volume131en_US
dc.identifier.wosWOS:000396118600030en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolish Acad Sciences Inst Physicsen_US
dc.relation.ispartofActa Physica Polonica Aen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectLead-Free Solderen_US
dc.subjectPb-Free Soldersen_US
dc.subjectSn-Znen_US
dc.subjectCorrosion-Resistanceen_US
dc.subjectTensile Propertiesen_US
dc.subjectAlkaline-Solutionen_US
dc.subjectBehavioren_US
dc.subjectCuen_US
dc.subjectMicrohardnessen_US
dc.subjectAgen_US
dc.titleAn Investigation of Microstructure and Mechanical Properties of Sn-9Zn-xCr Alloys Produced by Investment Casting Methoden_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu