An investigation into the effect of welding current on the plasma arc welding of pure titanium

dc.contributor.authorKahraman, N.
dc.contributor.authorTaskin, M.
dc.contributor.authorGülenç, B.
dc.contributor.authorDurgutlu, A.
dc.date.accessioned2024-09-29T16:16:10Z
dc.date.available2024-09-29T16:16:10Z
dc.date.issued2010
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn the present study, plasma arc welding method was applied to commercial purity titanium using various welding current values. In order to determine the strength of the resulting joints, tensile tests, impact tests and hardness tests were applied. Additionally, optical microscopy examinations were carried out to determine the interface properties of the joints. The work showed that the highest interface strength was obtained for the specimens joined at 65 A. For all the welding parameters, the hardness test results showed that weld metal gave a higher hardness value than heat affected zone and base metal. The microstructure in welded joint consisted of acicular alpha and twins.en_US
dc.identifier.doi10.4149/km-2010-3-179
dc.identifier.endpage184en_US
dc.identifier.issn0023-432X
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-77958049478en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage179en_US
dc.identifier.urihttps://doi.org/10.4149/km-2010-3-179
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8894
dc.identifier.volume48en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofKovove Materialyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPlasma arc weldingen_US
dc.subjectTitaniumen_US
dc.subjectWelding currenten_US
dc.titleAn investigation into the effect of welding current on the plasma arc welding of pure titaniumen_US
dc.typeArticleen_US

Dosyalar