The effects of Cu and Al on dry sliding wear properties of eutectic Sn-9Zn lead-free solder alloy

Basit Öğe Kaydı
dc.authoridYAVUZER, Bekir/0000-0001-8984-774X
dc.contributor.authorOzyurek, D.
dc.contributor.authorYavuzer, B.
dc.contributor.authorTuncay, T.
dc.date.accessioned2024-09-29T16:02:40Z
dc.date.available2024-09-29T16:02:40Z
dc.date.issued2016
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe present study investigates the influence of Cu and Al on microstructure and wear behavior of a eutectic Sn-9Zn solder alloy. The Sn-9Zn-X alloy was produced by adding various amounts of Cu and Al through investment casting method. The produced Sn-9Zn-X alloys were characterized by a scanning electron microscope, X-ray diffraction, and hardness measurements. In wear tests at 1ms(-1) sliding speed, 10N load and 5 different sliding distances (400-2000m) were used. The results show that as the amount of Cu and Al increased within Sn-9Zn alloy, the hardness of the alloy increased as well. Depending on the increase in hardness of the alloys produced by investment casting, it was observed that weight loss decreased during wear tests. Furthermore, the same proportion of added Al alloys' hardness and weight loss were observed to be higher than the added Cu alloys. Furthermore, the Cu-added alloy exhibited higher hardness and lower weight loss than the Al-added alloy did.en_US
dc.identifier.doi10.1080/01694243.2016.1157432
dc.identifier.endpage1670en_US
dc.identifier.issn0169-4243
dc.identifier.issn1568-5616
dc.identifier.issue15en_US
dc.identifier.scopus2-s2.0-84964239542en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1662en_US
dc.identifier.urihttps://doi.org/10.1080/01694243.2016.1157432
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5629
dc.identifier.volume30en_US
dc.identifier.wosWOS:000373527900006en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofJournal of Adhesion Science and Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectmicrostructureen_US
dc.subjectdry sliding wear propertiesen_US
dc.subjectSn-Zn lead-free solder alloysen_US
dc.titleThe effects of Cu and Al on dry sliding wear properties of eutectic Sn-9Zn lead-free solder alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu