Evaluation of internal structure modifications effect of two-phase closed thermosyphon on performance: An experimental study
Küçük Resim Yok
Tarih
2021
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Pergamon-Elsevier Science Ltd
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this paper, an experimental study has been carried to enhance the effectiveness of a two-phase closed ther-mosyphon (TPCT) type heat pipe. For this purpose, three different designs have been developed by modifying the internal structure so as not to interfere with the physical operation of TPCT. Three heat pipes with different internal structures were manufactured with additional pipes placed longitudinally inside the evaporator and condenser sections of the normal (conventional) TPCT. Ionized pure water is used as a working fluid at the same rate in Normal, Type-1, Type-2, and Type-3 heat pipes. TPCTs are positioned at three different inclination angles, 26 degrees, 41 degrees, and 56 degrees, to see the performance effect not only among themselves but also on the changes made by the gravitational effect. For each tilt angle, four TPCTs were simultaneously powered by solar energy on three different days. As a result of the experiments carried out in July, it has been observed that the optimum incli-nation angle for solar water heated TPCT is 26 degrees. In addition, it was found that with the increase of the angle of tilt, the thermal resistance (R) of the heat pipes also increased and the heat transferability of the TPCT decreased. Comparing the new designs and normal TPCT, Type-2 acted better at tilt angles of both 26 degrees and 41oAs a result, the heat transfer and efficiency of normal TPCT have been improved by almost 14% with Type-2 at the tilt angle of 26 degrees.
Açıklama
Anahtar Kelimeler
Solar energy, Two-phase closed thermosyphon, Modification, Performance
Kaynak
Solar Energy
WoS Q Değeri
Q2
Scopus Q Değeri
Q1
Cilt
224
