Effect of TiC, TiN, and TiCN on Microstructural, Mechanical and Tribological Properties of PM Steels

Basit Öğe Kaydı
dc.authoridAkgul, Yasin/0000-0001-5643-5968
dc.contributor.authorErden, Mehmet Akif
dc.contributor.authorTasliyan, Mehmet Furkan
dc.contributor.authorAkgul, Yasin
dc.date.accessioned2024-09-29T16:06:44Z
dc.date.available2024-09-29T16:06:44Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractDevelopments in sintering of powder mixtures contributed growth of steel production via powder metallurgy. This study aims to improve the mechanical and tribological properties of carbon steels produced via powder metallurgy. For this purpose, P/M carbon steel was alloyed with 3 % Manganese. Then, this alloyed steel was reinforced with particles such as titanium carbide (TiC), titanium nitride (TiN) and titanium carbonitride (TiCN) in different proportions (0.5 and 1 %) and combinations. The effect of these additives on the mechanical properties of PM steels was determined by conducting tensile and hardness tests. Wear tests were performed to understand the tribological properties of samples. Also, microstructural properties, fracture surfaces, and worn surfaces of samples were examined using a Scanning Electron Microscope. Results show that the hardness and tensile strength of carbon steel increased by nearly 158 % and 62 % respectively, while the wear resistance improved by 4 times with the addition of 3 % Mn and 0.5 % TiCN.en_US
dc.description.sponsorshipKarabuk Iron and Steel Instituteen_US
dc.description.sponsorshipThe authors would like to thank the Karabuk Iron and Steel Institute for their support for analyses.en_US
dc.identifier.doi10.2298/SOS2104497E
dc.identifier.endpage508en_US
dc.identifier.issn0350-820X
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85122327090en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage497en_US
dc.identifier.urihttps://doi.org/10.2298/SOS2104497E
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7020
dc.identifier.volume53en_US
dc.identifier.wosWOS:000756037700007en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherInt Inst Science Sintering (I I S S)en_US
dc.relation.ispartofScience of Sinteringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSinteringen_US
dc.subjectPowder metallurgyen_US
dc.subjectSteelen_US
dc.subjectMechanical propertiesen_US
dc.subjectWear resistanceen_US
dc.titleEffect of TiC, TiN, and TiCN on Microstructural, Mechanical and Tribological Properties of PM Steelsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu

We collect and process your personal information for the following purposes: Authentication, Preferences, Acknowledgement and Statistics.
To learn more, please read our privacy policy.

Customize