The influence of some factors on steel/steel bonding quality on there characteristics of explosive welding joints

Basit Öğe Kaydı
dc.contributor.authorAcarer, M.
dc.contributor.authorGülenç, B.
dc.contributor.authorFindik, F.
dc.date.accessioned2024-09-29T16:21:06Z
dc.date.available2024-09-29T16:21:06Z
dc.date.issued2004
dc.departmentKarabük Üniversitesien_US
dc.description.abstractExplosive welding is a solid state process in which controlled explosive detonations force two or more metals together at high pressures. The resultant arrangement is joined with a high quality metallurgical bond. The aim of this study was to investigate of strength of explosive welding metals which had same chemical compositions. In this study, it was taken different welding interfaces (straight, wavy and continuous solidified-melted) with changing explosive welding parameters (stand-off distance (s), explosive loading (R) and anvils). Joined metals were investigated in heat treatment and non heat treatment conditions. Microstructures, microhardness, tensile shear strength and bending test results were reported. Effect of anvil on explosive welding process was evaluated in joining/no joining performance. It was shown that bonding interface changed from straight to wavy structure when explosive loading and stand-off distance were increased. On wavy interface, when explosive loading was increased wavy length and amplitude increased. Results of tensile shear and bending tests showed that heat treated specimens have more strength than which of unheat-treated ones. According to tensile shear test results, straight and wavy interfaces had similar strength. Also, bending zone has shown some cracks after the bending test of unheated specimens. © 2004 Kluwer Academic Publishers.en_US
dc.identifier.doi10.1023/B:JMSC.0000044883.33007.20
dc.identifier.endpage6466en_US
dc.identifier.issn0022-2461
dc.identifier.issue21en_US
dc.identifier.scopus2-s2.0-6944229998en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage6457en_US
dc.identifier.urihttps://doi.org/10.1023/B:JMSC.0000044883.33007.20
dc.identifier.urihttps://hdl.handle.net/20.500.14619/9547
dc.identifier.volume39en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofJournal of Materials Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectExplosive bondingen_US
dc.subjectExplosive weldingen_US
dc.subjectExplosivesen_US
dc.subjectHeat treatmenten_US
dc.subjectInterfaces (materials)en_US
dc.subjectJoints (structural components)en_US
dc.subjectMetallographic microstructureen_US
dc.subjectMicrohardnessen_US
dc.subjectTensile strengthen_US
dc.subjectBonding interfacesen_US
dc.subjectMetallurgical bondsen_US
dc.subjectMicrostructural changesen_US
dc.subjectSteelen_US
dc.titleThe influence of some factors on steel/steel bonding quality on there characteristics of explosive welding jointsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu