A study on the effects of test frequency on the fatigue life of pla parts manufactured by additive manufacturing

Basit Öğe Kaydı
dc.contributor.authorAyan, Yusuf
dc.date.accessioned2024-09-29T16:35:13Z
dc.date.available2024-09-29T16:35:13Z
dc.date.issued2024
dc.departmentKarabük Üniversitesien_US
dc.description.abstractFatigue tests of materials require longer time than most other mechanical tests when the enitre process is considered. One of the most critical factors affecting the test time is the test frequency. In this study, fatigue tests at different test frequencies were applied to the PLA parts produced by the additive manufacturing (AM) technique, and the effects of test frequency were investigated. In the fatigue tests, four different stress levels were applied, and the tests were carried out at four different frequencies: 2 Hz, 4 Hz, 6 Hz, and 8 Hz. The fatigue life of the samples changed according to the applied stress levels at varying test frequencies. There was an approximately 44% decrease in the fatigue life found with increasing test frequency at the 1st stress level Fatigue life showed an increasing trend at and after the 3rd stress level. At the 4th stress level, fatigue life increased by 45% when the test frequency was changed from 2 Hz to 8 Hz. In general, after a specific fatigue life, it was observed that increasing test frequency tended to increase the fatigue life.en_US
dc.identifier.endpage71en_US
dc.identifier.issn2149-4916
dc.identifier.issue1en_US
dc.identifier.startpage60en_US
dc.identifier.trdizinid1234211en_US
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1234211
dc.identifier.urihttps://hdl.handle.net/20.500.14619/12602
dc.identifier.volume10en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.institutionauthorAyan, Yusuf
dc.language.isoenen_US
dc.relation.ispartofGazi Mühendislik Bilimleri Dergisien_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleA study on the effects of test frequency on the fatigue life of pla parts manufactured by additive manufacturingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu