MATERIAL PRODUCTION AND THE EFFECT OF THE SYSTEM ON BIOCOMPATIBILITY IN THE MODIFIED METAL INJECTION METHOD

Basit Öğe Kaydı
dc.contributor.authorCicek, Bunyamin
dc.contributor.authorSun, Yavuz
dc.date.accessioned2024-09-29T16:07:45Z
dc.date.available2024-09-29T16:07:45Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the bio state of the alloy produced in the modified metal injection system was monitored after sintering. A new system operating with high gas pressure, far from the traditional injection model, has been established for material production. In this system, 316L stainless steel powders were molded using a PEG/PMMA/SA polymer recipe. During molding, approximately 60% 316L and 40% binder by volume were used. The samples obtained were sintered at different temperatures (1100-1300 degrees C) after de-binding. Density measurement (Archimedes) and hardness tests (HV1) of the samples were measured as 6.74 g/cm3 and-285 HV1, respectively. A potentiodynamic corrosion test was applied to monitor the effect of the amount of oxide in the structure of the 316L stainless steel produced. Corrosion tests were carried out in artificial body solutions. The corrosion rate was measured at the level of 17.08x10-3 mm/y. In terms of biocompatibility, a cytotoxicity test was applied to the samples and the life course of the bacteria was monitored. For the 316L alloys produced, the % vitality reached approximately 103%.en_US
dc.description.sponsorshipKarabuk University Scientific Project Unit [FDK-2019-2106]en_US
dc.description.sponsorshipAuthors would like to thank the Karabuk University Scientific Project Unit (FDK-2019-2106) for financial support in the completion of this study.en_US
dc.identifier.doi10.24425/amm.2023.141494
dc.identifier.endpage204en_US
dc.identifier.issn1733-3490
dc.identifier.issn2300-1909
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85147140234en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage195en_US
dc.identifier.urihttps://doi.org/10.24425/amm.2023.141494
dc.identifier.urihttps://hdl.handle.net/20.500.14619/7132
dc.identifier.volume68en_US
dc.identifier.wosWOS:000948495100030en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pasen_US
dc.relation.ispartofArchives of Metallurgy and Materialsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectMetal Injection Moldingen_US
dc.subjectStainless steelen_US
dc.subjectpolymeren_US
dc.subjectbiomaterialen_US
dc.subjectcytotoxicityen_US
dc.titleMATERIAL PRODUCTION AND THE EFFECT OF THE SYSTEM ON BIOCOMPATIBILITY IN THE MODIFIED METAL INJECTION METHODen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu