The Effect of SiO2 on the Friction Performance of Automotive Brake Friction Materials

Basit Öğe Kaydı
dc.contributor.authorBoz, M.
dc.contributor.authorKurt, A.
dc.date.accessioned2024-09-29T16:11:09Z
dc.date.available2024-09-29T16:11:09Z
dc.date.issued2011
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, 0.5%, 1.0%, 2.0% and 4.0% weighted SiO2 powders were added to bronze-based materials, which are used as friction materials. Blended powders were mixed in three-dimensional mixers to provide a homogeneous mixture. Powders were pressed under pressure of 350 MPa using a single-action press. Pressed samples were sintered at 820 degrees C, for 20 minutes, in ammonia atmosphere. Sintered samples are tested in a wear test device. Wear and friction coefficient tests are carried out on sintered samples. As revealed, with higher amounts of SiO2, the friction coefficient is increased, and the wear ratio is decreased.en_US
dc.identifier.endpage405en_US
dc.identifier.issn1024-1809
dc.identifier.issue3en_US
dc.identifier.startpage389en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/8219
dc.identifier.volume33en_US
dc.identifier.wosWOS:000294586300010en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherNatl Acad Sciences Ukraine, Inst Metal Physicsen_US
dc.relation.ispartofMetallofizika I Noveishie Tekhnologiien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectfriction materialsen_US
dc.subjectSiO2en_US
dc.subjectbrake liningen_US
dc.subjectwearen_US
dc.subjectfrictionen_US
dc.titleThe Effect of SiO2 on the Friction Performance of Automotive Brake Friction Materialsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu