Investigation of the effect of different welding parameters on tensile properties and failure modes of non-alloyed steel produced by powder metallurgy

Basit Öğe Kaydı
dc.contributor.authorElitas, Muhammed
dc.contributor.authorErden, Mehmet Akif
dc.date.accessioned2024-09-29T16:05:02Z
dc.date.available2024-09-29T16:05:02Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractResistance spot welding was implemented to unalloyed steel produced by powder metallurgy method at different welding parameters in this study. Other welding parameters are constant, but electrode force values are 0.21-0.28-0.35 kN and welding current values are 9-10-11 kA. The effects of different welding parameters on microhardness, nugget diameter, tensile shear force, and failure mode were investigated. Consequently, the tensile shear force increased as welding current and electrode force up to a certain value increased. When critical electrode force value was exceeded, tensile shear force decreased, although nugget diameter increased. Compared to the base material, a decrease in tensile shear force has occurred in resistance spot welded joints. Except for values higher than the critical electrode force value, a linear relationship was determined between the nugget diameter, tensile shear force, and microhardness. Two different failure modes were observed, namely sheet transverse failure and partial interfacial failure.en_US
dc.identifier.doi10.1177/09544089231180542
dc.identifier.endpage2082en_US
dc.identifier.issn0954-4089
dc.identifier.issn2041-3009
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85162622174en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage2074en_US
dc.identifier.urihttps://doi.org/10.1177/09544089231180542
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6466
dc.identifier.volume237en_US
dc.identifier.wosWOS:001007892600001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofProceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPowder metallurgyen_US
dc.subjectresistance spot weldingen_US
dc.subjectmicrohardnessen_US
dc.subjecttensile shear forceen_US
dc.subjectfailureen_US
dc.titleInvestigation of the effect of different welding parameters on tensile properties and failure modes of non-alloyed steel produced by powder metallurgyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu