The effect of cutting parameters on cutting force during the processing of inconel 718 super alloy
Küçük Resim Yok
Tarih
2007
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, the effects of cutting parameters such as cutting speed, feed rate and cutting depth over cutting forces have been investigated. For this purpose, nickel based super alloy Inconel 718 has been processed with ceramic cutting tool having 1.2 mm insert radia on a digitally controlled turning lathe (CNC) without using cooling water. Different cutting processes having the values of five different cutting speeds (225, 300, 350, 400, 500 m/dak) and five different feed rates (0.05, 0.075, 0.1, 0.125, 0.15 mm/rev) and two different cutting depths (1mm, 2mm) have been implemented. In the experiments, the lowest main cutting force was obtained as (A-1-V) 192 N in 500 m/min cutting speed, 0.05 mm/rev feed rate speed and 1 mm depth of cut, the highest main cutting force was obtained as (B-5-I) 780 N in 225 m/min cutting speed, 0.15 mm/rev feed rate speed and 2 mm depth of cut.
Açıklama
Anahtar Kelimeler
Ceramic cutting tools, Cutting parameters, Main cutting force, Processing
Kaynak
Journal of the Faculty of Engineering and Architecture of Gazi University
WoS Q Değeri
Scopus Q Değeri
Q2
Cilt
22
Sayı
1
