Production and corrosion behaviours of the Al-12Si-XMg alloys containing in situ Mg2Si particles

Basit Öğe Kaydı
dc.authoridAHLATCI, Hayrettin/0000-0002-6766-4974
dc.contributor.authorAhlatci, H.
dc.date.accessioned2024-09-29T15:57:24Z
dc.date.available2024-09-29T15:57:24Z
dc.date.issued2010
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study the mechanical behaviours of Al-12Si-XMg alloys (where Mg contents varied up to 20%) have been investigated. The alloys were prepared by casting followed by extrusion at 300 degrees C with a ratio of 1.6. Precipitation of the Mg2Si phases was observed in the Mg containing Al-12Si alloys as two different morphologies; i.e., as a polyhedral primary particle and as a Chinese script. Results showed that volume fraction and size of the primary Mg2Si particles increased with increasing the Mg content. Mg containing alloys exhibited higher hardness, compression strength and lower corrosion resistance than the Mg free alloy. (C) 2010 Elsevier B.V. All rights reserved.en_US
dc.description.sponsorshipScientific and Technical Research Council of Turkey (TUBITAK)en_US
dc.description.sponsorshipThis work was supported by the Research Fund of the Scientific and Technical Research Council of Turkey (TUBITAK) in the framework of the support programme for scientific and technological research projects concerning Development of Alternative Composite Manufacturing Techniques For High Specific Strength Engineering Applications and Widening Its Usage In Turkey. I also express sincere appreciation to Prof. Dr. Huseyin CIMENOGLU from Istanbul Technical University for his valuable discussions and comments.en_US
dc.identifier.doi10.1016/j.jallcom.2010.04.214
dc.identifier.endpage126en_US
dc.identifier.issn0925-8388
dc.identifier.issn1873-4669
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-77955306529en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage122en_US
dc.identifier.urihttps://doi.org/10.1016/j.jallcom.2010.04.214
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4795
dc.identifier.volume503en_US
dc.identifier.wosWOS:000280623000027en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofJournal of Alloys and Compoundsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAl-Si alloyen_US
dc.subjectCorrosion propertiesen_US
dc.subjectMgen_US
dc.subjectIn situ Mg2Si particlesen_US
dc.titleProduction and corrosion behaviours of the Al-12Si-XMg alloys containing in situ Mg2Si particlesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu