A comparison of tonnage-dependent shot blast and electro-discharge texturing methods

Basit Öğe Kaydı
dc.authoridCOLAK, BILAL/0000-0002-1988-1464
dc.contributor.authorColak, Bilal
dc.date.accessioned2024-09-29T16:03:03Z
dc.date.available2024-09-29T16:03:03Z
dc.date.issued2021
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThis study investigated the surface roughness characteristics of rolls textured using the Shot-Blast Texturing and Electro-Discharge Texturing methods. The rolling tests were carried out in an actual cold rolling mill tandem line, and the surface roughness transferred from the roughened rolls to the material with these two methods was examined. The study measured and compared the surface roughness of roughened rolls and the materials rolled by them. The study observed that the transfer ratio of electro-discharge texturing rolls was higher, but the transfer ratio of SBT rolls increased towards the end of the rolling campaign. The study also examined the extent to which the surface roughness of the rolls changed after rolling. Therefore, the level of reduction and how much was preserved were determined by comparing the surface roughness of the rolls before and after the rolling campaign. Shot-blast texturing rolls were found to have lost 53% of their roughness while electro-discharge texturing rolls lost only 33%.en_US
dc.identifier.doi10.1088/2051-672X/ac2611
dc.identifier.issn2051-672X
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85117213044en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1088/2051-672X/ac2611
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5874
dc.identifier.volume9en_US
dc.identifier.wosWOS:000702109600001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherIop Publishing Ltden_US
dc.relation.ispartofSurface Topography-Metrology and Propertiesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectsurface roughness (Ra)en_US
dc.subjectpeak count (RPc)en_US
dc.subjectroughness transferen_US
dc.subjectroughness retentionen_US
dc.subjectroughness lossen_US
dc.subjectrolling campaignen_US
dc.subjectsurface topographyen_US
dc.titleA comparison of tonnage-dependent shot blast and electro-discharge texturing methodsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu