Effect of Rolling Deformation on Microstructure and Mechanical Properties of As-Cast and Rolled ZM21 Magnesium Alloy

Basit Öğe Kaydı
dc.contributor.authorOzdemir, Umit
dc.contributor.authorKoc, Erkan
dc.contributor.authorTuren, Yunus
dc.contributor.authorElen, Levent
dc.contributor.authorCicek, Bunyamin
dc.contributor.authorSaud, A. Najah
dc.date.accessioned2024-09-29T15:54:32Z
dc.date.available2024-09-29T15:54:32Z
dc.date.issued2023
dc.departmentKarabük Üniversitesien_US
dc.description.abstractThe current study aimed to improve the microstructure and mechanical properties of ZM21 magnesium alloy by using the rolling thermomechanical process at various temperatures (275 and 375 degrees C) and rates (40 and 60%). The rolled samples' grain size was examined, and it was found that the grain size decreased by 40% during hot deformation, reaching a grain size of 15.91 mu m. Surface roughness values were examined and found to be the lowest (parallel and perpendicular to the rolling direction) at a 60% rolling rate in 275 degrees C and the highest 40% at 375 degrees C. The highest tensile strength was obtained at a rolling rate of 60% at 375 degrees C, but it showed brittle fracture during testing. Accordingly, while the 275 degrees C rolled samples showed ductile fracture behavior, a slight reduction in mechanical properties was observed when the rolling ratio was set at 60%.en_US
dc.description.sponsorshipScientific Research Projects Coordination (BAP) of Karabuk University [FYL2019-2019]en_US
dc.description.sponsorshipThis study was supported by the Scientific Research Projects Coordination (BAP) of Karabuk University, project number: FYL2019-2019.en_US
dc.identifier.doi10.1007/s11665-022-07468-y
dc.identifier.endpage5051en_US
dc.identifier.issn1059-9495
dc.identifier.issn1544-1024
dc.identifier.issue11en_US
dc.identifier.scopus2-s2.0-85139626503en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage5043en_US
dc.identifier.urihttps://doi.org/10.1007/s11665-022-07468-y
dc.identifier.urihttps://hdl.handle.net/20.500.14619/4119
dc.identifier.volume32en_US
dc.identifier.wosWOS:000866373300008en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal of Materials Engineering and Performanceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectmagnesiumen_US
dc.subjectmechanical propertiesen_US
dc.subjectmicrostructureen_US
dc.subjectrollingen_US
dc.subjectZM21 alloyen_US
dc.titleEffect of Rolling Deformation on Microstructure and Mechanical Properties of As-Cast and Rolled ZM21 Magnesium Alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu