Multicriteria optimization of cutting parameters in turning of UD-GFRP materials considering sensitivity

Basit Öğe Kaydı
dc.authoridKentli, Aykut/0000-0002-4098-7220
dc.contributor.authorIsik, B.
dc.contributor.authorKentli, A.
dc.date.accessioned2024-09-29T15:50:55Z
dc.date.available2024-09-29T15:50:55Z
dc.date.issued2009
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this paper, a new multicriteria optimization approach is proposed for the selection of the optimal values of cutting conditions in machining. This approach aims to handle the possible manufacturing errors in design stage. These errors are taken into consideration as change in design parameters and the design most robust to change is selected as the optimum design. Machining of a glass fiber composite material is chosen in case studies. Experiments on the unidirectional glass fiber reinforced composite material are performed to investigate the effect of cutting speed, feed, and cutting depth on the cutting forces. Also, material removal rate values are obtained. Minimizing cutting forces and maximizing the material removal are considered as objectives. It is believed that the used method provides a robust way of looking at the optimum parameter selection problems.en_US
dc.description.sponsorshipMechanical Engineering of Faculty; Yildiz Technical University; TUBITAK-BAYGen_US
dc.description.sponsorshipThe author is very grateful to Dr. Erhan Altan of the Mechanical Engineering of Faculty, Yildiz Technical University for the support rendered. The author is also thankful to TUBITAK-BAYG for funding this research.en_US
dc.identifier.doi10.1007/s00170-009-1927-9
dc.identifier.endpage1153en_US
dc.identifier.issn0268-3768
dc.identifier.issue11-12en_US
dc.identifier.scopus2-s2.0-70349283483en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage1144en_US
dc.identifier.urihttps://doi.org/10.1007/s00170-009-1927-9
dc.identifier.urihttps://hdl.handle.net/20.500.14619/3799
dc.identifier.volume44en_US
dc.identifier.wosWOS:000269881600009en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer London Ltden_US
dc.relation.ispartofInternational Journal of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMachining optimizationen_US
dc.subjectUD-GFRPen_US
dc.subjectCutting forceen_US
dc.subjectMulticriteria optimizationen_US
dc.titleMulticriteria optimization of cutting parameters in turning of UD-GFRP materials considering sensitivityen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu