The influence of cutting tool rake angle on cutting forces when machining aluminium alloys

Basit Öğe Kaydı
dc.contributor.authorSekmen, M.
dc.contributor.authorGunaya, M.
dc.contributor.authorCiftcib, I.
dc.contributor.authorKorkut, I.
dc.contributor.authorSekera, U.
dc.date.accessioned2024-09-29T16:22:24Z
dc.date.available2024-09-29T16:22:24Z
dc.date.issued2005
dc.departmentKarabük Üniversitesien_US
dc.descriptionJapan Society of Mechanical Engineers (JSME),; Manufacturing and Machine Tool Division; Japan Society of Mechanical Engineers (JSME),; Manufacturing System Divisionen_US
dc.description3rd International Conference on Leading Edge Manufacturing in 21st Century, LEM 2005 -- 19 October 2005 through 22 October 2005 -- Nagoya -- 98756en_US
dc.description.abstractIn this study, experimental investigation of the effect of cutting tool rake angle during machining of AA 2011 and AA 7075 aluminium alloys was earned out. For this purpose, a previously designed and manufactured dynamometer incorporating load cells was used to measure the cutting forces during turning. This system enabled the tool holder to rotate so that the cutting tool's rake angle could be adjusted. The machining tests were conducted at six different rake angles, five different cutting speeds while feed rate and depth of cut were kept constant. During the tests, primary cutting force (Fc) and feed force (Fa) components were measured and recorded on a personal computer (PC). Theoretical cutting force values were also determined using Kienzle approach. The results showed that cutting forces decreased with increasing rake angle and increasing cutting speed for the both alloys.en_US
dc.identifier.endpage176en_US
dc.identifier.scopus2-s2.0-84883672483en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage173en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14619/10038
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofLEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Centuryen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAluminium. cutting forcesen_US
dc.subjectMachiningen_US
dc.subjectRake angleen_US
dc.titleThe influence of cutting tool rake angle on cutting forces when machining aluminium alloysen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu