The Effects of Molding Materials on Microstructure and Wear Behavior of A356 Alloy

Basit Öğe Kaydı
dc.authoridYILDIRIM, MUSA/0000-0002-2464-1182
dc.contributor.authorYildirim, Musa
dc.contributor.authorOzyurek, Dursun
dc.contributor.authorTuncay, Tansel
dc.date.accessioned2024-09-29T16:06:13Z
dc.date.available2024-09-29T16:06:13Z
dc.date.issued2017
dc.departmentKarabük Üniversitesien_US
dc.description.abstractIn this study, the effect of molding materials on microstructure and wear behavior of A356 alloy was investigated. Different microstructures were obtained by casting A356 alloy into the molds made from three different materials. Homogenization and aging heat treatments were applied as cast blocks. The aged samples were tested by pin-on-disk-type standard wear equipment. The results showed that casting into different mold materials resulted in different microstructures of A356 alloy. Microstructures of the Al-Si-Mg alloy differ depending on the mold materials. Secondary dendrite arm space (SDAS) decreased proportionally with increasing cooling rate. Based on the cooling rate, hardness values of the alloy also differ. As the cooling rate increased, hardness of the alloy increased. The SDAS increased due to the decreasing cooling rate. In wear tests, increasing weight loss was observed with decreasing cooling rate.en_US
dc.identifier.doi10.1515/htmp-2015-0240
dc.identifier.endpage521en_US
dc.identifier.issn0334-6455
dc.identifier.issn2191-0324
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85020705213en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage515en_US
dc.identifier.urihttps://doi.org/10.1515/htmp-2015-0240
dc.identifier.urihttps://hdl.handle.net/20.500.14619/6708
dc.identifier.volume36en_US
dc.identifier.wosWOS:000402370700009en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWalter De Gruyter Gmbhen_US
dc.relation.ispartofHigh Temperature Materials and Processesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectA356en_US
dc.subjectcooling rateen_US
dc.subjectwear behavioren_US
dc.titleThe Effects of Molding Materials on Microstructure and Wear Behavior of A356 Alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu