Surface Severe Plastically Deformed Nanostructured AA7075 Alloy: Assessment on Tribological and Axial Fatigue Behaviors
dc.authorid | Maleki, Erfan/0000-0002-5995-1869 | |
dc.contributor.author | Efe, Yusuf | |
dc.contributor.author | Karademir, Ibrahim | |
dc.contributor.author | Husem, Fazil | |
dc.contributor.author | Maleki, Erfan | |
dc.contributor.author | Unal, Okan | |
dc.date.accessioned | 2024-09-29T15:51:29Z | |
dc.date.available | 2024-09-29T15:51:29Z | |
dc.date.issued | 2020 | |
dc.department | Karabük Üniversitesi | en_US |
dc.description.abstract | AA7075 alloy is exposed to severe shot peening (SSP) with an Almen intensity of 20A. The microstructure is analyzed via FEGSEM and EBSD microscopy. X-ray diffraction (XRD) analysis is used to evaluate the crystallite size in terms of FWHM measurements. The residual stress measurements show a thicker compressed layer (600 mu m) formed by SSP. Microhardness improvements are observed as 30% on topmost surface and releases substantially after 600 mu m. Coefficient of friction (COF) of treated material remains higher throughout the sliding distance, however, is reduced particularly in the early stage of sliding distance for the wear load of 20 N. The effect of SSP is vanished particularly at lower loads with longer sliding distances. Besides, improvement on fatigue behavior is observed after SSP despite the increase of roughness remarkably. | en_US |
dc.description.sponsorship | Karabuk University Project Coordinator Unit (KBUBAP) [KBuBAP-18-YL-001] | en_US |
dc.description.sponsorship | The authors wish to thank to Karabuk University Project Coordinator Unit (KBUBAP) for supporting this work with the KBuBAP-18-YL-001 project. | en_US |
dc.identifier.doi | 10.1007/s11665-020-04892-w | |
dc.identifier.endpage | 3783 | en_US |
dc.identifier.issn | 1059-9495 | |
dc.identifier.issn | 1544-1024 | |
dc.identifier.issue | 6 | en_US |
dc.identifier.scopus | 2-s2.0-85087851583 | en_US |
dc.identifier.scopusquality | Q2 | en_US |
dc.identifier.startpage | 3774 | en_US |
dc.identifier.uri | https://doi.org/10.1007/s11665-020-04892-w | |
dc.identifier.uri | https://hdl.handle.net/20.500.14619/4106 | |
dc.identifier.volume | 29 | en_US |
dc.identifier.wos | WOS:000540407900001 | en_US |
dc.identifier.wosquality | Q4 | en_US |
dc.indekslendigikaynak | Web of Science | en_US |
dc.indekslendigikaynak | Scopus | en_US |
dc.language.iso | en | en_US |
dc.publisher | Springer | en_US |
dc.relation.ispartof | Journal of Materials Engineering and Performance | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | axial fatigue | en_US |
dc.subject | grain refinement | en_US |
dc.subject | residual stress | en_US |
dc.subject | severe shot peening | en_US |
dc.title | Surface Severe Plastically Deformed Nanostructured AA7075 Alloy: Assessment on Tribological and Axial Fatigue Behaviors | en_US |
dc.type | Article | en_US |