Wear behaviour of organic asbestos based and bronze based powder metal brake linings

Basit Öğe Kaydı
dc.contributor.authorKurt, A
dc.contributor.authorBoz, M
dc.date.accessioned2024-09-29T15:57:52Z
dc.date.available2024-09-29T15:57:52Z
dc.date.issued2005
dc.departmentKarabük Üniversitesien_US
dc.description.abstractBronze based brake linings, were produced by powder metallurgy technique and their wear behaviour was investigated and compared to that of asbestos ones. Bronze powders were compacted under 350, 500 and 600 MPa pressures and sintered at 810 degrees C in ammonia atmosphere for 75 min. For the same friction distance, it was determined that temperature increase in the bronze based brake linings was lower than that of asbestos based ones. However, higher wear rate was observed in the bronze based brake linings. Moreover, thermal conductivity was decreased with high porosity level with low densities. Although, friction coefficient remained the same during breaking, an increase in wear resistance was observed. (C) 2004 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2004.09.006
dc.identifier.endpage721en_US
dc.identifier.issn0261-3069
dc.identifier.issue8en_US
dc.identifier.startpage717en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2004.09.006
dc.identifier.urihttps://hdl.handle.net/20.500.14619/5049
dc.identifier.volume26en_US
dc.identifier.wosWOS:000230472700009en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectpowder metallurgyen_US
dc.subjectbrake liningen_US
dc.subjectfriction materials and wearen_US
dc.titleWear behaviour of organic asbestos based and bronze based powder metal brake liningsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu